HF 508 TILTING FLOW CHANNEL, 75 mm. wide
Enquiry
Video
Download
This is a bench top, self contained open channel designed for studying flow phenomena. It is a service unit to be used with optional accessories and models below.
The channel is of rectangular cross section supported by a steel frame. Side walls are transparent to allow full visual observation. Tilting can be adjusted by a manual screw jack. A stainless-steel head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank.
Instruction manual is also included.
- Flow measurement
Hydraulic jump
Continuity and energy equations
Discharge under sluice gate
|
: 75 mm wide, 250 mm high | |||
|
: 2.5 m (Extended length can be supplied on request.) | |||
|
: -2% to + 5% | |||
|
: Clear acrylic with clear vertical scale | |||
|
: Stainless steel | |||
|
: 1 | |||
|
: 1 | |||
|
: Water meter with stop watch. | |||
|
: 220 V, 1 Ph, 50 Hz. Other power supply is available on request. |
- Net (unassembled) Shipping Dimensions WxLxH: 60 x 340 x 90 cm
- Net Weight: Approx. 150 kg
| Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments. |
| Stainless steel vernier hook and point gauge 300 mm with 0.05 mm reading |
| Stainless steel hook and point gauge 300 mm x 0.5 mm scale |
| Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment |
| Sharp crested weir |
| Broad crested weir, sharp edges |
| Round edge attachment for HF507-023 |
| Crump weir |
| Trapezoidal weir |
| Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board. |
| Dam spillway consisting of base profile unit with different interchangeable downstream sections: - Toe, ski jump, piers and pegs, gravel box, or stop logs |
| Syphon spillway made from clear acrylic and PVC |
| Bridge pier, round or square |
| Culvert fittings, round or square edge |
| Venturi flume made from clear acrylic with stainless steel attachment. |
| Sluice gate, sliding type with stainless steel attachment |
| Radial gate, rack and pinion drive, with stainless steel attachment. |
| Pitot tube with manometer board for measurement of flow velocity at various channel sections. |
| Current meter |
| Roughened bed, gravel, sand, or corrugated |
| Wave generator with variable speed geared motor |
| Flow digital display |
Other accessories and models can be supplied on request.
Other optional equipment, please contact manufacturer (essom@essom.com)
| : Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments. |
