Thermodynamics > Internal combustion engines test beds

MT501M SINGLE CYLINDER ENGINE TEST BED, Mechanical Brake Absorber

Enquiry

Video

Download

The unit provides basic means for testing a single cylinder gasoline or diesel engine.

The engine is connected to the mechanical brake absorber dynamometer on the test bed by a direct coupling with a safety guard. The engine throttle and dynamometer load are manually controlled. Instruments are provided for measurement of the absorber torque, speed, fuel flow rate, air flow rate, and temperatures. Fuel tank and measuring instruments are on a separate stand.

The test bed requires outside water supply for cooling.

Instruction manual is also included.

  • Torque vs engine speed at various throttle setting.
  • Engine brake horsepower and efficiency vs speed

  • Specific fuel consumption

  • Air/fuel ratio

  • Volumetric efficiency

  • PV diagram (optional)

  • Dynamometer
    
- Type: Water cooled stainless steel mechanical brake absorber with anti-splashing system.   
- Capacity: Up to 20 kW at 5000 rpm   
  • Engine
: Gasoline engine with power 3.7 kW or as required   
  • Measuring instruments
    
- Torque: Spring balance at the dynamometer   
- Speed: Portable tachometer   
- Fuel flow rate: Graduated cylinder and stop watch   
- Air flow rate: Air box with pulse reducer, orifice plate, and inclined water manometer.   
- Barometer    
  • Sensors with digital display
: Temperature for absorber water outlet, ambient air and exhaust gas.   
  • Accessories
: Fuel tank and coupling guard   
  • Power supply
: 220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 75x 195 x 75 cm.
  • Net Weight: Approx. 120 kg.
  • MT501MS
Learning Software
to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • MT500-010
Portable exhaust gas analyzer (HC, CO, CO2, O2, NOX)
  • MT502-041
Torque arm with standard weights for torque calibration.
  • MA202-450
Water manometer, 0-450 mm x 1 mm graduation, for differential pressure calibration
  • MT500-030
P-V diagram set
  • MT500-030D
Sensor adapter for selected diesel engine
  • MT500-030G
Sensor adapter for selected gasoline engine
  • MT502-001
Additional interchangeable 5 kW diesel engine. In this case, additional fuel tank, fuel filter, and carburetor adapter are also supplied.
  • MT501-014
Dynamometer water cooling with pump and stand instead of outside water supply.
 - Capacity : 3 RT (Higher capacity for larger engine is available on request)
  • MT501-050
Computer Interface (computer not included)
 This includes MT501MS and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), 
 

additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)

MT500-030 P-V Diagram

  • MT501MS
Learning Software
to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS