Structure and accessories >

ST 400 UNIVERSAL TEST FRAME, 300kN

Enquiry

Video

Download

The universal test frame is used for studying loading experiments on steel work or civil engineering structure such as girder, beam, truss etc. where actual 1:1 loading can be made. The structure is to be provided by the user.

It consists of twin frame with intermediate space to permit structure longer than the frame opening to be tested. The frame is made of channels joined together by high strength bolts. Two cross bearers under the columns support the frame and rest on four anti vibration leveling feet. The frame is to be assembled at site.

Loading is by hydraulic jacks on traveling carriages. Accessories for loading, attachment of dial gauges, and stabilization of the experiment plane frame are provided.

Instruction manual is also included.

  • Verification of structure deflection under loads.
  • Main frame
:  Twin frame of channel
  • Loading capacity
 
-   Three point bending:  300kN
-   Four point bending:  2x 200kN
  • Frame opening
:  3.5 x 1.65 m
  • Maximum distance between two loading points
:  5.25 m
  • Traveling carriages
:  2
  • Hydraulic pump
:  With mobile table and 4 hoses with self-sealing coupling
  • Hydraulic jacks
 
  • Measuring instruments
:  2
- Force gauges:  2
- ST 131 Dial Indicators:  3
  • Power supply
:  220 V, 1 Ph, 50Hz. Other power supply is available on request.
  • Accessories include cross bearers, thick plates, half round bearings, full round bearings, c-clamps, cross beams for holding dial   gauge or truss member in place.
  • Net (unassembled) Shipping Dimensions WxLxH: 125 x 560 x 185 cm
  • Net Weight:  Approx. 2,500 kg
  • ST400S
Learning Software
                                to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • A-frame with 5 MT hoist for heavy beam installation.
  • 30 MT load digital display.
  • ST400-050
Computer Interface (computer not included)
                                 This includes ST400S and significant sensor(s) with data acquisition (capture, display, graph and/or data export) instead of analog measuring instrument(s), additional software function for real-time data logging with computer assist unit and WiFi feature for data logging and display remotely on smartphone (iOS and Android)
  • ST400S
Learning Software
                                 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS