HF 135A PIPING LOSS APPARATUS

FLUID MECHANICS > Piping loss test sets

HF 135A PIPING LOSS APPARATUS

Enquiry

Video

Download

This is a comprehensive unit for studying the friction losses in pipes, pipe fittings, and valves; and to determine coefficients of discharge for primary flow measuring devices at various flow rates.

All friction loss components and the flow measuring devices are arranged on a water proof panel which is attached to a floor standing steel frame. The apparatus is to be used with a Hydraulic Bench (separately supplied) or an outside water supply.

Friction loss is measured by a pressure drop and coefficient of discharge is determined from a pressure drop and a flow rate. Flow rate is obtained from a water meter and a stop watch. The pressure drop is measured by differential pressure using manometer and differential pressure gauge.  Pressure tapping in by small ball valves with quick connection. All pressure taps are connected by flexible hoses to a set of specially arranged manifolds such that differential pressure across any component can be measured simply by opening valves without removing the hoses.

The unit is on a steel frame with adjustable footings.

Instruction manual is also included. 

  • Friction losses in straight pipes at various flow rates

  • Friction losses in pipe fittings, valves, sudden expansion and contraction at various flow rates

  • Friction losses in primary flow measuring devices and comparison of coefficients of discharge at various flow rates

  • Primary flow measuring devices
:  Clear plastics   

- Venturi tube

- Orifice plate

- Pitot tube

    
  • Friction loss components
    

- Linear pipes, PVC

- Linear pipe, stainless steel

- Valves

- Short radius bends

- Long radius bends

- Regular elbow

- 45o elbows

- 45o Y

- Other components

:  3 different diameters

:  1

:  Gate, globe, ball, and check

:  2

:  2

:  1

:  2

:  1

:  Tee section, Inline strainer, Sudden expansion, Sudden contraction

   
  • Measuring Instruments
    

- Flow rate

- Differential pressure

:  Water meter with stop watch

:  Water manometer with hand air pump

:  Differential pressure gauge

   
     
  • Net (unassembled) Shipping Dimensions WxLxH: 35 x 245 x 105 cm
  • Net Weight:  Approx. 99 kg
  • HF135S
Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HB100N or HB100
Hydraulics Bench, Neo or Hydraulics Bench (required accessory)
  • HF011
Variable area flow meter
  • HP010
Flow digital display
  • HF013
ISA nozzle
  • HP020
Additional polyethylene, Polybutylene, or ABS pipe
  • HF021
Additional galvanized steel pipe
  • HF022
Additional artificially roughened pipe
  • HF023
Additional annular pipe
  • HF024
Additional flexible hose with adapter
  • HF033A
Differential pressure digital display instead of differential pressure gauge.
  • HF033B

Mercury manometer instead of differential pressure gauge

Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally. Approximately 50 cc or 700g is required. Filling kit is provided.

  • HF033C
Portable differential pressure meter instead of differential pressure gauge
  • HF034A
Portable differential pressure meter instead of water manometer
  • HP009
Pressure gauges at pump inlet and discharge for pump pressure vs flow rate curve
  • HF135-050                                                     

Computer Interface (computer not included)

This includes HF135S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)

  • Other pipes and fittings can be supplied on request.
  • HF135S                     
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 135 PIPING LOSS TEST SET, Large

HF 135 PIPING LOSS TEST SET, Large

Enquiry

Download

This is a self-contained water circulating unit for studying the friction losses in pipes, pipe fittings, and valves; and to determine coefficients of discharge for primary flow measuring devices at various flow rates.

The unit consists of a pump, a storage tank and a water proof panel on which all friction loss components and the flow measuring devices are arranged.

Friction loss is measured by a pressure drop and coefficient of discharge is determined from a pressure drop and a flow rate. Flow rate is obtained from a water meter and a stop watch. The pressure drop is measured by differential pressure using manometer and differential pressure gauge. Pressure tapping is by small ball valves with quick connection. All pressure taps are connected by flexible hoses to a set of specially arranged manifolds such that differential pressure across any component can be measured simply by opening valves without removing the hoses. The unit is on a steel frame on wheels.

Instruction manual is also included.

  • Friction losses in straight pipes at various flow rates

  • Friction losses in pipe fittings, valves, sudden expansion and contraction at various flow rates

  • Friction losses in primary flow measuring devices and comparison of coefficients of discharge at various flow rates

  • Pump
:  1   
  • Water storage tank
:  1   
  • Primary flow measuring devices
:  Clear acrylic   

- Venturi tube

- Orifice plate  

- Pitot tube           

    
  • Friction loss components
    

- Straight pipes, PVC

- Straight pipe, stainless steel

- Valves

- Short radius bends

- Long radius bends

- Regular elbow

- 45o elbows

- 45o Y

- Other components

:  3 different diameters

:  1

:  Gate, globe, ball, and check

:  2

:  2

:  1

:  2

:  1

:  Tee section, Inline strainer, Sudden expansion, Sudden contraction

   
  • Measuring Instruments
    

- Flow rate

- Differential pressure

:  Water meter with stop watch

:  Water manometer with hand air pump

:  Differential pressure gauge

   
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 90 x 245 x 105 cm
  • Net Weight:  Approx. 160 kg
  • HF135S     
Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HF011
Variable area flow meter
  • HP010
Flow digital display
  • HF013
ISA nozzle
  • HP020
Additional polyethylene, Polybutylene, or ABS pipe
  • HF021
Additional galvanized steel pipe
  • HF022
Additional artificially roughened pipe
  • HF023
Additional annular pipe
  • HF024
Additional flexible hose with adapter
  • HF033A
Differential pressure digital display instead of differential pressure gauge.
  • HF033B

Mercury manometer instead of differential pressure gauge

Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally. Approximately 50 cc or 700g is required. Filling kit is provided.

  • HF033C
Portable differential pressure meter instead of differential pressure gauge
  • HF034A
Portable differential pressure meter instead of water manometer
  • HP009

Pressure gauges at pump inlet and discharge for pump pressure vs flow rate curve

  • Other pipes and fittings can be supplied on request.
  • HF135S          
: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 125A PIPING LOSS APPARATUS, Small

HF 125A PIPING LOSS APPARATUS, Small

Enquiry

Video

Download

This is a comprehensive unit for studying the friction losses in pipes, pipe fittings and valves at various flow rates.

All friction loss components are arranged on a water proof panel which is attached to a floor standing steel frame. The apparatus is to be used with a Hydraulics Bench (separately supplied) or an outside water supply.

The loss is measured by differential pressure using manometers and differential pressure gauge. Pressure tapping is by small ball valves with quick connection. All pressure taps are connected by flexible hoses to a set of specially arranged manifolds such that differential pressure across any component can be measured simply by opening valves without removing the hoses. The unit is on a steel frame with adjustable footings.

Instruction manual is also included.

  • Friction losses in straight pipes at various flow rates

  • Friction losses in pipe fittings, valves, sudden expansion and contraction at various flow rates

  • Friction loss components  

 

   

     - Straight pipes, PVC 

     - Straight pipe, stainless steel

     - Valves

     - Short radius bends  

     - Long radius bends

     - Regular elbow   

     - 45o elbows

     - 45o Y

     - Other components  

:  3 different diameters

:  1

:  Gate, globe, ball, and check

:  2

:  2

:  1

:  2

:  1

:  Tee section, Inline strainer, Sudden expansion, Sudden contraction

   
  • Measuring Instruments
    

      - Flow rate

     - Differential pressure

 

:  Water meter with stop watch

:  Water manometer with hand air pump

:  Differential pressure gauge 

   
     
     
     
  • Net (unassembled) Shipping Dimensions WxLxH: 35 x 245 x 105 cm
  • Net Weight:  Approx. 90 kg
  • HF135S
: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HB100N or HB100                                                           
Hydraulics Bench, Neo or Hydraulics Bench (required accessory)
  • HF011
Variable area flow meter
  • HP010
Flow digital display
  • HP020
Additional polyethylene, Polybutylene, or ABS pipe
  • HF021
Additional galvanized steel pipe
  • HF022
Additional artificially roughened pipe
  • HF023
Additional annular pipe
  • HF024
Additional flexible hose with adapter
  • HF033A
Differential pressure digital display instead of differential pressure gauge.
  • HF033B

Mercury manometer instead of differential pressure gauge

Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally. Approximately 50 cc or 700g is required. Filling kit is provided.

  • HF033C
Portable differential pressure meter instead of differential pressure gauge
  • HF034A
Portable differential pressure meter instead of water manometer
  • HF135-050

Computer Interface (computer not included)

This includes HF135S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)

  • Other pipes and fittings can be supplied on request.
  • HF135S     
: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 125 PIPING LOSS TEST SET, Small

HF 125 PIPING LOSS TEST SET, Small

Enquiry

Video

Download

This is a self-contained unit for studying the friction loss in pipes, pipe fittings and valves at various flow rates.

The unit consists of a pump, a storage tank and a water proof panel on which all friction loss components are arranged.

The loss is measured by differential pressure using manometer and differential pressure gauge. Pressure tapping is by small ball valves with quick connection. All pressure taps are connected by flexible hoses to a set of specially arranged manifolds such that differential pressure across any component can be measured simply by opening valves without removing the hoses. The unit is on a steel frame on wheels.

Instruction manual is also included.

  • Friction losses in straight pipes at various flow rates

  • Friction losses in pipe fittings, valves, sudden expansion and

    contraction at various flow rates

  • Pump

:  1

   
  • Water storage tank
:  1   
  • Friction loss components
    

     - Straight pipes, PVC 

     - Straight pipe, stainless steel

     - Valves

     - Short radius bends  

     - Long radius bends  

     - Regular elbow   

     - 45o elbows

     - 45o Y

     - Other components   

:  3 different diameters

:  1

:  Gate, globe, ball, and check

:  2

:  2

:  1

:  2

:  1

:  Tee section, Inline strainer, Sudden expansion, Sudden contraction

   
  • Measuring Instruments
    

     - Flow rate

     - Differential pressure

 

:  Water meter with stop watch

:  Water manometer with hand air pump

:  Differential pressure gauge

   
  • Power supply         
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 90 x 245 x 85 cm
  • Net Weight:  Approx. 135 kg
  • HF135S
: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HF011
Variable area flow meter
  • HP010
Flow digital display
  • HP020
Additional polyethylene, Polybutylene, or ABS pipe
  • HF021
Additional galvanized steel pipe
  • HF022
Additional artificially roughened pipe
  • HF023
Additional annular pipe
  • HF024
Additional flexible hose with adapter
  • HF033A
Differential pressure digital display instead of differential pressure gauge.
  • HF033B
Mercury manometer instead of differential pressure gauge Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally. Approximately 50 cc or 700g is required. Filling kit is provided.
  • HF033C
Portable differential pressure meter instead of differential pressure gauge
  • HF034A
Portable differential pressure meter instead of water manometer
  • HF135-050
Computer Interface (computer not included) This includes HF135S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • Other pipes and fittings can be supplied on request.
  • HF135S     
: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS