MM 460 SPEED CONTROL TRAINER

Machine Elements and Theory of Machine > Force and Motion Study > MM Series

MM 460 SPEED CONTROL TRAINER

Enquiry

Video

Download

This trainer is designed for studying and understanding the fundamental of motor speed control in various system via modern technology. A motor is connected to one end of the fly wheel and the other end is connected to the generator. An electrical load is also connected to the generator as a load of the system. The motor speed and the generator load can be set from panel and/or computer. A transparent cover with safety switch is provided.

Instruction manual is also included.

  • Open Loop Control
  • Manual Close Loop Control: Manual Control Load
  • Automatic Close Loop Control: PID.
  • Automatic Close Loop Control: Trial and error tuning
  • Automatic Close Loop Control:  Ziegler-Nichols method
  • Automatic Close Loop Control:  Load
  • Motor
    
     - Voltage: 24 Vdc   
     - Maximum speed: approx. 3,500 rpm.   
  • Flywheel
    
     - Size: Diameter 100 mm   
     - Weight: 350 g   
     - Shaft: Stainless steel   
  • Generator
    
     - Voltage: 24 Vdc   
     - Maximum speed: approx. 3,500 rpm.   
  • Measuring instrument with digital display
: Speed of rotor   
 : Voltage and current for motor and generator.   
  •  Computer Interface unit with software for data display, analysis, and control by computer (separately supplied)     
    
  • Power supply: 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

    
  • Net (unassembled) Shipping Dimensions WxLxH:  40 x 44 x 43 cm
  • Net Weight:  Approx. 26 kg
SIMILAR PRODUCTS

MM 113 JIB CRANE APPARATUS

Enquiry

Video

Download

The equipment is designed to study forces in jib crane elements. Jib crane has two elements which are attached to a vertical rod. The lower element is called jib and the upper element is termed as tie. Load is applied at the junction of jib and tie to produce tension and compression in tie and jib respectively.

Instruction manual is also included.

  • Calculation of the forces in jib crane.
  • Comparison of experimental and theoretical results
  • Vertical columns
: 1   
  • Compression member
: 1   
  • Tension members
: 1   
  • Load hanger
: 1   
  • Weights
: 1 lots.   
  • Net (unassembled) Shipping Dimensions WxLxH:  ... x ... x ... cm
  • Net Weight:  Approx. ... kg
  • Spring balance and weight in Newtons instead of grams.
  • Other optional equipment, please contact manufacturer ([email protected])
SIMILAR PRODUCTS

MM 575 INTERMITTENT MOTION SET

MM 575 INTERMITTENT MOTION SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

A Geneva stop and a ratchet mechanism are used to demonstrate how rotary motion is converted into a start – stop motion.

Instruction manual is also included.

  • Relation between rotary motion and start – stop angular motion.
  • Geneva stop
    
  • Ratchet mechanism
    
  • Plastic box
    
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM575S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 574 ROTARY MOTION FOR TWO SHAFT SET

MM 574 ROTARY MOTION FOR TWO SHAFT SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

Oldham coupling and universal joint are used for study of relative angular displacement for the two shafts.

Instruction manual is also included.

  • Relation of angular displacement between two parallel but displaced shafts.
  • Relation of angular displacement between two intersecting shafts and effect of angle between the two shafts.
  • Old ham coupling
  • Universal joint
  • Plastic box
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM574S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 573 ROTARY – TRANSLATION MOTION SET

MM 573 ROTARY – TRANSLATION MOTION SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

Slider crank, slotted link, and quick return mechanism and step pulley are used for studying relation of rotary motion and translation.

Instruction manual is also included.

  • Relation of rotary motion and translation in slider crank, slotted link and quick return mechanism and step pulley.
  • Slider crank
  • Slotted link
  • Quick return mechanism
  • Step pulley
  • Cord
  • Weight hanger
  • Plastic box
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM573S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 572 CAM AND FOLLOWER SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

Cam rotation is measured on angular scale and follower displacement is measured by a dial indicator.

Instruction manual is also included.

  • Relation of cam rotation vs follower linear displacement for different types of cam and follower.
  • Cam and follower base frame with angular scale
    
  • Eccentric cam
    
  • Pear shape cam
    
  • Spiral cam
    
  • Flat face follower
    
  • Roller follower
    
  • Dial indicator with holder
    
  • Plastic box
    
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM572S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 571 BAR LINKAGES SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

Over 20 perforated bars of different lengths and joints are used for assembly to form different linkages. The bar can accommodate a pencil to trace the movement of the linkages on paper.

Instruction manual is also included.

  • Four bar linkages.
  • Straight line linkages.
  • Pantograph
  • Ackermann steering
  • Bars with holes of different lengths
  • Pencil holder
  • Graph paper
  • Fixed joint attachments
  • Movable joint attachments
  • Plastic box
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM571S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 562 CENTRIFUGAL FORCE SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

A rotating frame consists of a shaft, sliding masses and calibrated spring. When rotated, the mass forces the spring to compress. Centrifugal force is measured by spring compression and rotation speed is measured by mental count and stop watch.

Instruction manual is also included.

  • Relationship of centrifugal force with rotating speed, mass and its distance from axis of rotation.
  • Centrifugal force frame
  • Stop watch
  • Masses
  • Plastic box
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM562S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 561 SIMPLE HARMONIC MOTION SET

MM 561 SIMPLE HARMONIC MOTION SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

This kit includes different pendulums with support, spring mass system, load hanger and weights. A stop watch measures motion period.

Instruction manual is also included.

  • Simple harmonic motion of simple, bifilar and trifilar pendulums.
  • Simple harmonic motion of spring- mass system.
  • Simple harmonic motion for compound and Kater’s pendulums.
  • Top plate support for pendulums
    
  • Simple pendulums
    
  • Kater pendulum
    
  • Bifilar bar
    
  • Trifilar plate
    
  • Spring
    
  • Stop watch
    
  • Load hanger
    
  • Weights
    
  • Plastic box
    
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM561S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 553 GEAR TRAIN SET

Enquiry

Video

Download

This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.

The set includes spur gear set, worm and wheel, bevel gear set with load hangers and weights for determination of gear ratio, mechanical advantage and efficiency of the gear system.

Instruction manual is also included.

  • Characteristics of spur gears for single and compound trains.
  • Characteristics of bevel gear.
  • Characteristics of worm and wheel.
  • Spur gears of different number of teeth
    
  • Worm and wheel set
    
  • Bevel gear set
    
  • Cords
    
  • Load hangers
    
  • Weights
    
  • Plastic box
    
  • Net (unassembled) Shipping Dimensions WxLxH:  45 x 36 x 14 cm
  • Net Weight:  Approx. 5 kg
  • MM553S

: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS