Successful setup of environmental engineering equipment at AIT University

Successful setup of environmental engineering equipment at AIT University

We are honored to share the recent setup of our Permeability and groundwater flow apparatuses at AIT university! This addition plays vital role in enhancing hands-on learning for students exploring groundwater flow, soil permeability, and sustainable environmental practices.

With these apparatuses, students can drive into essential topics in hydrogeology and environmental engineering, transforming theoretical knowledge into practical skills and real-word insights. We extend our gratitude to AIT university for their trust in our solutions, and we look forward to seeing how these apparatuses enhances their educational programs.

Successful fluid mechanic lab installation and training at UNHEVAL in Peru

Successful fluid mechanic lab installation and training at UNHEVAL in Peru

We are excited to share the successful setup of our advanced fluid mechanics lab equipment at Universidad Nacional Hermilio Valdizan in Peru. With the assistant our dedicated distributor Labtop ciencia & technologia, the installation was completed seamlessly by a comprehensive training session to ensure faculty and students can make the most of these state of-the-art educational equipment.

Our fluid mechanics lab solutions are designed to enhance hands-on learning, enabling students to explore key concepts through practical, real-world experiments. We are proud to support educational excellence worldwide. 

HF 540CM TILTING FLOW CHANNEL, 400 mm wide

HF 540CM TILTING FLOW CHANNEL, 400 mm wide

Enquiry

Download

The channel is designed for studying the hydraulic flow phenomena. It is a service unit to be used with optional accessories and models below. Instruction manual is also included.

Under Frame
The channel bed rests on twin beams under frame which ensures static loading deflections are kept to a minimum. Each section is shipped with glass side walls. This simplifies site installation and is easier to ensure alignment of the channel. The beams are supported by a fulcrum at one end and an adjustable height support at the other end.

Slope Adjustment
The adjustable height support uses twin screws. Each screw is driven by a worm and wheel gear box with a common motor. A slope scale is provided at one end of the flume.

Channel Bed
The channel bed is made of stainless steel with screw holes of equal distance along the channel length to hold accessories or models to the channel bed. These holes can also be used for pressure tapping to measure pressure loss along the channel length (optional).

Side Walls
For safety reasons, the side walls are made of tempered glass or clear acrylic. The walls are supported at interval by brackets with screw adjustment to ensure that the channel wall is straight and vertical.

Head Tank
The head tank is made of stainless steel and its sides and bottom are curved to ensure smooth flow into the channel. Perforated sheets are also provided in the head tank to further smoothen the flow.

Storage Tank
The storage tank has adequate water to fill the full channel. Fiber glass storage tank(s) is provided at downstream end of the channel. Capacity of tank varies according to channel length.

Circulating Pump
The pump seal is mechanical. A geared butterfly valves is provided for accurate flow control.

Flow measurement
A flow digital display is used for easy observation on flow adjustment. A water meter is available as an option and may be used as a reference for flow indicator setting later.

Safety Device
Limit switches for slope, level switches for water level, emergency stop, and ELCB.

Model and Accessories ( Optional)
All accessories and models have side seals to ensure no water seepage or leakage through the sides of the models. A wide variety of models and accessories are available as an option.

. Flow measurement
. Hydraulic jump
. Analysis of model structures
. Gauging structures
. Velocity profile
. Continuity and energy equations
. Similarity laws
. Roughened bed characteristics
. Surge propagation
. Sediment transport study system
. Wave generation and absorption

  • Channel size
: 400 mm wide, 500 mm high   
  • Channel length
: 12.5 m working section. Other length, i.e. 5, 7.5, 10 m, or can be supplied on request (optional).   
  • Tilting adjustment
:  -1% to +3%   
  • Side walls
:  6 mm tempered glass   
  • Channel bed
:  Stainless steel   
  • Water storage tank
:  Fiber glass over 1500 L   
  • Head tank
:  Stainless steel    
  • Sluice gate
:  Stainless steel, rack and pinion type, built-in at downstream end of channel   
  • Pump
:  5.5 kW with a maximum flow rate approximately 1800 Lpm   
  • Flow measurement
:  Flow digital display   
  • Power supply

:  380 V, 3 Ph, 50 Hz. Other power supply is available on request.

   
     
  • Shipping Dimensions: One 40 ft. container (without storage tank)
  • Mobile ladder with brake wheels and guardrail for model installation.
  • HF540-001
Instrument carriage, manual operated.
  • HF540-001A
Motorized instrument carriage instead of manually operated.
  • HF540-085
End tank, stainless steel, at downstream end of flume
  • HF540-090
Checker plate walkway along one side of the flume
  • HF540S

Learning Software

 to support both online/offline training with data calculation and analysis by manual data entry from standard measuring instruments
  • HF540-019
Stainless steel vernier hook and point gauge 450 mm with 0.05 mm reading.
  • HF540-019A
Stainless steel hook and point gauge 450 mm with plastic vernier scale 0.5 mm reading.
  • HF540BWB
Basic weir base
  • HF540-020
Stainless steel 60˚V notch or 90˚V notch
  • HF540-021
Rectangular notch weir
  • HF540-022
Sharp crested weir with weir base.
  • HF540-023
Broad crested weir, sharp edges
  • HF540-023A
Round edge attachment for HF530-023
  • HF540-024
Crump weir
  • HF540-025
Trapezoidal weir
  • HF540-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF540-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

 - Toe, ski jump, piers and pegs, gravel box, stop logs, chute block, baffle block with five rectangular blocks, baffle block with five triangular blocks, and end sill with different height.
  • HF540-032
USBR type 2,3 or 4 energy dissipater.
  • HF540-033
Syphon spillway made from clear acrylic and PVC
  • HF540-034
Bridge pier, round or square edge
  • HF540-035
Culvert fittings, round or square , horizontal or drop inlet with or without entrance flare Tube is made from clear acrylic
  • HF540-036
Vibration pile
  • HF540-040
Venturi flume made from clear acrylic.
  • HF540-041
Parshall flume made from clear acrylic.
  • HF540-042
Submerged orifice made from stainless steel on plastics.
  • HF540-043
Trapezoidal flume made from clear acrylic.
  • HF540-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF540-052
Radial gate, rack and pinion drive with stainless steel attachment
  • HF540-060
Pitot tube with manometer board for measurement of flow velocity and various channel sections
  • HF540-061
Current meter: digital or analog indicator, low speed probe from 5 to 150 cm/s or high speed probe 60-300 cm/s
  • HF540-065
Lift and drag balance and models, large and small cylinders and aerofoil section
  • HF540-070
Roughened bed, gravel, sand, or corrugated , 2.4 m
  • HF540-071
False floor section (Sill).
  • HF540-075
Sediment transport study system
  • HF540-080
Wave generator with  variable speed geared motor, maximum stroke 20 cm
  • HF540-082
Absorbing beach, plain, roughened, or permeable.
  • HF540-085
End tank, stainless steel, at downstream end of flume.
  • HF540-090
Checker plate walkway along one side of the flume.
  • PH100-020
Multi tubes water manometer, 10 tubes, water pressure 450 mm.
  • Rake model.
 
  • HF540-150
Computer Interface
 This includes computer interface and software for data display of flow rate and slope by computer.
  • HF540-160
Computer Control
                                This includes pump speed, tilting, display of pressure distribution and computer interface unit for key data acquisition and software for control by computer.
  • Other accessories and models can be supplied on request.
  • HF540S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

SP 114 SURFACE TENSION APPARATUS

SP 114 SURFACE TENSION APPARATUS

Enquiry

Video

Download

This apparatus is designed for measuring the surface tension of liquids. A horizontal ring is suspended on load cell and immersed in a liquid in a dish which is put on an adjustable height support stand. The force is measured and shown on a digital display.

Instruction manual is also included.

Measurement of Surface tension

  • Measuring ring
:  2 different diameter sharp edge plastic rings with suspension cords
  • Dish
:  150 mm diameter
  • Support stand
:  Adjustable height
  • Stand
:  Stainless steel with adjustable footings and bull’s eye level
  • Force measurement
:  Digital display in Millinewton or gram
- Measuring range:  200 mN with 1 mN resolution or 20g with 0.1g resolution
- Zero compensation (Tare):  Manual
  • Power supply
:  220V, 1Ph, 50Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 20 x 30 x 45 cm
  • Net Weight:  Approx. 3.5 kg
SIMILAR PRODUCTS

HT 703 MULTI TURBINE TEST SET

HT 703 MULTI TURBINE TEST SET

Enquiry

Video

Download

This is a self contained set of three different types of turbine namely-Pelton, Francis, Cross Flow, designed for studying the turbine characteristics under various flow rates and heads.

The unit consists of a pump and a storage tank, turbine units connected in parallel, a dynamometer for each turbine, and measuring instruments. The unit is on wheels.

Instruction manual is also included.

Each turbine can be tested on the following:

  • Torque vs speed at various heads and flow rates
  • Power output vs speed for various heads and flow rates
  • Efficiency vs speed for a given head and flow rate
  • Racing characteristics.
  • Pelton turbine
 
- Construction:  Stainless steel runner
 :  Stainless steel casing with transparent window
- Ratings:  Maximum power over 400 W
  • Francis turbine
 
- Construction:  Bronze runner
 : Non corrosion metal casing with adjustable guide vanes and transparent window to observe guide vane position.
- Ratings:  Maximum power over 400 W
  • Cross Flow turbine:
 
-  Construction:  Stainless steel runner
 :  Stainless steel casing with transparent window
-  Ratings:  Maximum power over 400 W
  • Pump ratings
 
-  Motor:  2.2 kW
  • Water storage tank
:  1
  • Dynamometer
:  Water cooled mechanical brake absorber with anti splashing system.
  • Measuring instruments
:  Pressure gauges at turbine inlets
-  Torques

:  Speed for each turbine

-  Pressures:  Flow rate
-  Sensors with digital display:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  
  • Power supply
 
  
  • Net (unassembled) Shipping Dimensions WxLxH:

    96 x 280 x 150 cm

  • Net Weight:  Approx. 380 kg
  • HT703S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HD160SA
Water brake absorber instead of mechanical brake absorber
  • HP003
Advanced inverter for controlling and indicating motor speed as well as for calculating motor input power. Hence pump efficiency at various speeds can be determined.
  • HP011
Additional pressure digital display
  • HT010L
Electric generator with voltage and current digital display and lamp loads
  • HT703-603
Kaplan turbine unit capable of generating over 400 W of brake power, metal runner, non- corrosion metal casing with adjustable guide vanes, transparent window and runner section, water brake absorber, spring balance, speed sensor and pressure gauge.
  • HT703-050
Computer Interface (computer not included)
 This includes HT703S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT703-060
Computer Control (computer not included)
 This includes HT 703-050 with the additional accessories for control function and additional software function for equipment controls by computer
 -  Flow and load control motors
                                                - Additional software function for equipment controls by computer
  • HT703S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HT 702 COMPACT PELTON/FRANCIS TURBINE TEST SET

HT 702 COMPACT PELTON/FRANCIS TURBINE TEST SET

Enquiry

Video

Download

This is a self contained set of Pelton and Francis turbines, designed for studying the turbine characteristics under various flow rates and heads.

The unit consists of a pump, a storage tank, a Pelton and a Francis turbine connected in parallel, a dynamometer for each turbine, and measuring instruments. The unit is on adjustable footings.

Instruction manual is also included.

Each turbine can be tested on the following:

  • Torque vs speed at various heads and flow rates
  • Power output vs speed for various heads and flow rates
  • Efficiency vs speed for a given head and flow rate
  • Racing characteristics.
  • Pelton turbine
 
- Construction:  Stainless steel runner
 :  Stainless steel casing with transparent window
- Ratings:  Maximum power 400 W
  • Francis turbine
 
- Construction:  Bronze runner
 :  Non-corrosion metal casing with adjustable guide vanes and transparent window
- Ratings:  Maximum power over 400 W
  • Pump ratings
 
- Motor:  2.2 kW
  • Water storage tank
:  1
  • Dynamometer
:  Water cooled mechanical brake absorber with anti splashing system
  • Measuring instruments
 
- Torque:  Spring balance
- Pressure:  Pressure gauges at turbine inlets
- Sensors with digital display:  Flow rate and speeds
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 45 x 110 x 110 cm
  • Net Weight:  Approx. 90 kg
  • HT702S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HD160SA
Water brake absorber instead of mechanical brake absorber
  • HP003
Advanced inverter for controlling and indicating motor speed as well as for calculating motor input power. Hence pump efficiency at various speeds can be determined.
  • HP011-3
Additional pressure digital display
  • HT010L
Electric generator with voltage and current digital display and lamp loads
  • HT702-050
Computer Interface (computer not included)
 This includes HT702S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT702-060
Computer Control (computer not included)
                                        This includes HT 702-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • HT702S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HT 701 MINI PELTON/FRANCIS TURBINE TEST SET

HT 701 MINI PELTON/FRANCIS TURBINE TEST SET

Enquiry

Download

This is a self contained bench top set of Pelton and Francis turbines, designed for studying the turbine characteristics under various flow rates and heads.

The unit consists of a pump, a storage tank on a steel base, a mini Pelton and a mini Francis turbine connected in parallel, a dynamometer for each turbine, and measuring instruments.

Instruction manual is also included.

Each turbine can be tested on the following:

  • Torque vs speed at various heads and flow rates
  • Power output vs speed for various heads and flow rates
  • Efficiency vs speed for a given head and flow rate
  • Racing characteristics.
  • Mini Pelton turbine:
 
- Construction

:  Stainless steel runner shaft and casing with transparent window

- Ratings:  Maximum power over 40 W
  • Mini Francis turbine:
 
- Construction:  Bronze runner
 :  Adjustable guide vanes. Non corrosion metal casing with transparent window to observe guide vane position
- Ratings:  Maximum power over 25 W
  • Pump ratings
 
- Motor   :  0.55 kW
  • Water storage tank
:  1
  • Dynamometer
:  Mechanical brake
  • Measuring instruments
 
- Torques:  Spring balances
- Speeds:  Portable tachometer
- Flow rate:  Water meter and stop watch
- Pressures:  Pressure gauges at turbine inlets
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 45 x 110 x 110 cm
  • Net Weight:  Approx. 90 kg
  • HT701S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HP0089
A pressure gauge at pump inlet for pump pressure vs flow rate curve
  • HT010R
Electric generator with voltage and current digital display and resistive load
  • HT701-601
Mini Kaplan turbine unit
 - Maximum power over 15 W
 - Metal runner, adjustable guide vanes
 - Stainless steel shaft
 - Non-corrosion metal casing with transparent window
 - Storage tank, plastics.
  • HT701-501AI
Mini Axial flow impulse turbine unit
 - Maximum power over 25 W
 - Metal runner
 - Stainless steel twin nozzles
 - Stainless steel shaft
 - Stainless steel casing with transparent discharge window
 - 30 L storage tank, plastics.
  • HT701-050
Computer Interface (computer not included)
 This includes HT701S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT701-060
Computer Control (computer not included)
                                                This includes HT 701-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • HT701S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HT610 KAPLAN TURBINE TEST SET

HT610 KAPLAN TURBINE TEST SET

Enquiry

Video

Download

The set is designed for studying the Kaplan turbine characteristics under various flow rates and heads.

The unit consists of a storage tank, a pump, a turbine, a dynamometer, a generator, and measuring instruments. Direct coupling generator with clutch is provided to simulate actual turbine generator operation. Power output at various flow rates, heads and speeds can be measured by either dynamometer or generator output. The adjustable guide vanes direct water helically to the runner.

The unit is on wheels.

Instruction manual is also included.

  • Torque vs speed at various heads and flow rates

  • Power output vs speed for various heads and flow rates

  • Efficiency vs speed for a given head and flow rate

  • Overall turbine generator efficiency

  • Racing characteristics

  • Turbine
 
- Construction:  Fixed blade stainless steel runner
 :  Bronze casing with 10 adjustable guide vanes and transparent window to observe runner and guide vane position
 :  Stainless steel shaft with mechanical seal
-  Turbine ratings:  Maximum power over 1500 W of mechanical output
 :  Maximum power approx. 3500 W of electrical output
  • Motor
:  7.5 kW
  • Generator
:  1.5 kW, 220 V, 1 Ph, 50 Hz.
  • Electrical load
:  Lamp bank
  • Water storage tank
:  1
  • Dynamometer
:  Water cooled stainless steel mechanical brake with anti-splashing system
  • Measuring instruments
 
-  Torque:  Spring balance
-  Pressure:  Pressure gauge
-  Sensors with digital display:  Voltage and current for electrical power output
 :  Flow rate and speed
  • Power supply
:  380 V, 3 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 110 x 180 x 175 cm
  • Net Weight:  Approx. 450 kg
  • HT610S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HP008
Advanced inverter for controlling and indicating motor speed as well as for calculating motor input power. Hence pump efficiency at various speeds can be determined.
  • HD200DA
Water brake absorber dynamometer instead of mechanical brake dynamometer. In this case, connection to the turbine with generator is by pulleys or direct coupling to the turbine without the generator.
  • HT610-050
Computer Interface (computer not included)
 This includes HT610S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT610-060
Computer Control (computer not included)
                                      This includes HT 610-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • HT610S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HT 601 MINI KAPLAN TURBINE TEST SET

HT 601 MINI KAPLAN TURBINE TEST SET

Enquiry

Video

Download

This is a self-contained bench top set for studying the Kaplan turbine characteristics under various flow rates and heads.

The unit consists of a storage tank on a steel base, a pump, a mini Kaplan turbine, a dynamometer, and measuring instruments. The adjustable guide vanes direct water helically to the runner.

Instruction manual is also included.

  • Torque vs speed at various heads and flow rates

  • Power output vs speed for various heads and flow rates

  • Efficiency vs speed for a given head and flow rate

  • Racing characteristics

  • Turbine
 
- Construction: Metal runner with adjustable guide vanes
 : Non-corrosion metal casing with transparent window
- Ratings: Maximum power over 15 W
  • Pump ratings
 
- Motor   :  0.55 kW
  • Water storage tank
:  1
  • Dynamometer
: Mechanical brake
  • Measuring instruments
 
-  Torque:  Spring balance
-  Speed:  Portable tachometer
-  Flow:  Water meter and stop watch
-  Pressure:  Pressure gauge
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  
  
  • Net (unassembled) Shipping Dimensions WxLxH: 40 x 110 x 85 cm
  • Net Weight:  Approx. 70 kg
  • HT6031
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HP009
Pressure gauge at pump inlet for pump pressure vs flow rate curve
  • HT010R
Electric generator with voltage and current digital display and resistive load.
  • HT601-050
Computer Interface (computer not included)
 This includes HT601S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT601-060
Computer Control (computer not included)
                                    This includes HT 601-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • HT601S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HT 603 COMPACT KAPLAN TURBINE TEST SET

HT 603 COMPACT KAPLAN TURBINE TEST SET

Enquiry

Video

Download

This is a self contained bench top set for studying the Kaplan turbine characteristics under various flow rates and heads.

The unit consists of a storage tank, a pump, a Kaplan turbine, a dynamometer, and measuring instruments. The adjustable guide vanes direct water helically to the runner.

Instruction manual is also included.

  • Torque vs speed at various heads and flow rates

  • Power output vs speed for various heads and flow rates

  • Efficiency vs speed for a given head and flow rate

  • Racing characteristics

  • Turbine
 
- Construction:  Fixed blade metal runner
 :  Non corrosion metal casing with adjustable guide vanes with transparent window for observation of runner and guide vane position
- Ratings: Over 400W of brake power
  • Pump ratings :
 
- Motor   :  2.2 kW
  • Water storage tank
:  1
  • Dynamometer
:  Water cooled mechanical brake absorber with anti splashing system
  • Measuring instruments
 
- Torque:  Spring balance
 - Pressure:  Pressure gauge
- Sensors with digital display:  Flow rate and speed
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  
  
  
  • Net (unassembled) Shipping Dimensions WxLxH: 76 x 140 x 90 cm
  • Net Weight:  Approx. 125 kg
  • HT603S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring
  • HD160SA
Water brake absorber instead of mechanical brake absorber.
  • HP003
Advanced inverter for controlling and indicating motor speed as well as for calculating motor input power. Hence pump efficiency at various speeds can be determined.
  • HT010R
Electric generator with voltage and current digital display, and resistive loads
  • HT603-001
Fixed blade stainless steel runner with different blade angle
  • HT603-050
Computer Interface (computer not included)
 This includes HT603S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • HT603-060
Computer Control (computer not included)
                                 This includes HT 603-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • HT603S
Learning Software
                                       to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS