HP 119V CENTRIFUGAL PUMP TEST SET

 

FLUID MECHANICS > Pump test set

HP 119V CENTRIFUGAL PUMP TEST SET

Enquiry

Video

Download

This is a self-contained set for studying the centrifugal pump characteristics at various speeds.

The unit consists of a storage tank, a centrifugal pump with a motor, an advanced inverter, and other measuring instruments. The unit is on wheels

Instruction manual is also included.

  • Flow rate vs head at various speeds

  • Pump input, output and overall efficiency at various speeds

  • Pump
 
-  Maximum flow rate:  150 LPM
-  Maximum head:  30 m water
  • Water storage tank
:  Approx. 100 L, PVC
  • Speed control
:  Advanced inverter.
  • Measuring instruments
 
-  Pressure:  Pressure gauges at pump suction and discharge
-  Flow rate:  Water meter and stop watch
-  Speed and motor input power display:  Advanced inverter
  • Power supply
:  220 V, 1 Ph, 50Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 75 x 110 x 130 cm
  • Net Weight:  Approx. 110 kg
  • HP115VS                   
Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
  • HP015
Measuring tank
  • HP119-002A
Motor dynamometer with an inverter, torque and speed digital display instead of advanced inverter.
HP119-050Computer Interface (computer not included)
 This includes HP119VS and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • Pump of different size or characteristic curve can be supplied on request.

  • Other optional equipment, please contact manufacturer ([email protected])

HP119VS          Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HP 115V COMPACT CENTRIFUGAL PUMP TEST SET, Variable Speed

HP 115V COMPACT CENTRIFUGAL PUMP TEST SET, Variable Speed

Enquiry

Video

Download

This is a self-contained bench top unit for studying the centrifugal pump flow rate vs head at various speeds.

The unit consists of a storage tank and a centrifugal pump with motor on a steel base, advanced inverter and measuring instruments.

Instruction manual is also included.

  • Flow rate vs head at various speeds

  • Pump input, output and overall efficiency at various speeds

  • Pump
 
-  Maximum flow rate:  80 LPM
-  Maximum head:  18 m water
  • Water storage tank
:  1
  • Speed control
:  Advanced inverter.
  • Measuring instruments
 
-  Pressure:  Pressure gauges at pump suction and discharge
-  Flow rate:  Water meter and stop watch
-  Speed and motor input power display:  Advanced inverter
  • Power supply
:  220 V, 1 Ph, 50Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: :  50 x 108 x 70 cm
  • Net Weight:  Approx. 30 kg
  • HP115VS     
Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
HP115VS          Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HP 115M COMPACT CENTRIFUGAL PUMP TEST SET, Multi Speed

HP 115M COMPACT CENTRIFUGAL PUMP TEST SET, Multi Speed

Enquiry

Download

This is a self-contained bench top unit for studying the centrifugal pump flow rate vs head at three different speeds.

The unit consists of a storage tank and a centrifugal pump with multi speed motor on a steel base, and measuring instruments.

Instruction manual is also included.

  • Flow rate vs head at three different speeds

  • Pump rating
 
-  Speeds:  3 different speeds
-  Maximum flow rate:  70 LPM
-  Maximum head:  7 m water
  • Water storage tank
:  1
  • Measuring instruments
 
-  Pressure:  Pressure gauges at pump suction and discharge
-  Flow rate:  Water meter and stop watch
  • Power supply
:  220 V, 1 Ph, 50Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: :  50 x 108 x 70 cm
  • Net Weight:  Approx. 27 kg
  • HP115S
Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
  • HP115-001     
Watt meter for measurement of pump input power. Hence pump efficiency can be determined.
HP115MS     Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HP 115 COMPACT CENTRIFUGAL PUMP TEST SET, Fixed Speed

HP 115 COMPACT CENTRIFUGAL PUMP TEST SET, Fixed Speed

Enquiry

Video

Download

This is a self-contained bench top unit for studying the centrifugal pump flow rate vs head at a fixed speed.

The unit consists of a storage tank and a centrifugal pump with motor on a steel base, and measuring instruments.

Instruction manual is also included.

  • Flow rate vs head

  • Pump
 
-  Maximum flow rate:  80 LPM
-  Maximum head:  18 m water
  • Water storage tank
:  1
  • Measuring instruments
 
-  Pressure:  Pressure gauges at pump suction and discharge
-  Flow rate:  Water meter and stop watch
  • Power supply
:  220 V, 1 Ph, 50Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: :  50 x 108 x 70 cm
  • Net Weight:  Approx. 30 kg
  • HP115S   
Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.

 

HP115S   Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HP 113 COMPACT CENTRIFUGAL PUMP TEST SET, Motor Dynamometer

HP 113 COMPACT CENTRIFUGAL PUMP TEST SET, Motor Dynamometer

Enquiry

Video

Download

This is a self-contained bench top unit for studying the centrifugal pump characteristics.

The unit consists of a storage tank and a centrifugal pump with a motor dynamometer on a steel base for measurement of TRUE pump input power and measuring instruments.

Instruction manual is also included.

  • Flow rate vs head at various speeds

  • Pump input, output and overall efficiency at various speeds

  • Pump
    
-  Maximum flow rate:  80 LPM   
-  Maximum head:  18 m water   
  • Water storage tank
:  1   
  • Speed control
:  Inverter   
  • Measuring instruments
    
- Pressure:  Pressure gauges at pump suction and discharge   
- Flow rate:  Water meter and stop watch   
- Sensors with digital display:  Speed and torque   
  • Power supply
:  220V, 1 Ph, 50 Hz. Other power supply is available on request.   

 

  • Net (unassembled) Shipping Dimensions WxLxH: 50 x 108 x 80 cm
  • Net Weight:  Approx. 62 kg
  • HP113S
Learning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
HP113-050Computer Interface (computer not included)
                                        This includes HP113S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export), additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
HP113-060Computer Control (computer not included)
 This includes HP 113-050 with the additional accessories for control function and additional software function for equipment controls by computer
HP113SLearning Software
 to support both online/offline training with data calculation   and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HP 111 CENTRIFUGAL PUMP DEMONSTRATION UNIT, Computer Interface

HP 111 CENTRIFUGAL PUMP DEMONSTRATION UNIT, Computer Interface

Enquiry

Video

Download

This is a bench top unit for studying the centrifugal pump characteristics with data display and analysis by computer.

The unit consists of an industrial centrifugal pump with a motor, a PVC storage tank on a steel base, software and sensor. 

HP 104 Advanced inverter with computer interface unit is required but separately supplied.

Instruction manual is also included.

  • Flow rate vs head at various speeds

  • Pump input, output and overall efficiency at various speeds

  • Pump
-  Maximum flow rate :  80 LPM
-  Maximum head :  18 m water
  • Water storage tank
:  18 m water
  • Speed control
:  HP104 (separately supplied)
  • Measuring instruments
-  Sensors with digital display :  Pressures for pump suction and discharge
:  Speed and motor input power
:  Flow rate
  • Software for data display and analysis by computer (separately supplied)
  • WiFi feature for data logging and/or real-time display remotely on smartphone (iOS and Android)
  • Net (unassembled) Shipping Dimensions WxLxH: 50 x 108 x 75 cm
  • Net Weight:  Approx. 40 kg
  • HP016
Water temperature digital display
  • HP104
Advanced inverter with computer interface unit (required accessory)
  • HP111-060
Computer control (computer not included)
                                     This includes Computer Interface (required HP104), with the additional accessories for control function and additional software function for equipment controls by computer
SIMILAR PRODUCTS

HP 104 ADVANCED INVERTER WITH COMPUTER INTERFACE UNIT

HP 104 ADVANCED INVERTER WITH COMPUTER INTERFACE UNIT

Enquiry

Video

Download

The unit is designed to be used with pump demonstration unit. The unit consists of an advanced inverter for controlling and indicating motor speed as well as for calculating motor input power and also provides power supply to the motor, digital display, and the computer interface unit.

  • Advanced inverter
:  Speed control.   
  • Digital display
:  Speed and motor input power.   
  • Computer interface unit
:  4 channels   
  • Input power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
     
     
  • Net (unassembled) Shipping Dimensions WxLxH: 21 x 31 x 11 cm
  • Net Weight:  Approx. 5 kg
SIMILAR PRODUCTS

HF 566 SEDIMENT FLOW CHANNEL, 600 mm Wide

HF 566 SEDIMENT FLOW CHANNEL, 600 mm Wide

Enquiry

Video

Download

The channel is designed for studying the sediment transport and bed forms as well as flow phenomena without sediment. It is a service unit to be used with optional accessories and models. Instruction manual is also included.

Under Frame

The channel bed rests on twin I-beam under frame which ensures static loading deflections are kept to a minimum. The length of the I-beam is about 6 m Each section is shipped with glass side walls. This simplifies site installation as there are less joints and is easier to ensure straight side walls throughout the length. To ensure minimum deflection, the I beam base frame of 18 m is supported by a fulcrum at the middle and adjustable height support at both upstream and downstream ends for a total of 3 supports.

Slope Adjustment

Each adjustable height support uses twin screws and with a system of worm and wheel gear boxes and miter gears which are intern driven by a motor. A slope scale is provided at one end of the flume.

Channel Bed

The channel bed is made of stainless steel with twin screw holes of equal distance along the channel length to hold accessories or models to the flume bed when used as a normal tilting flow channel. These holes can also be used for pressure tapping points to measure pressure loss along the channel length.

Side Walls

For safety reasons, the side walls are made of tempered glass. The walls are supported at interval by brackets with screws for vertical position adjustment.

Instrument Carriage

Top rails made of stainless steel tubes are attached to the top angle on each wall of the channel. Screws supporting the rails can be adjusted to ensure uniform height and in a straight line. A scale graduated in mm. is attached along the full length of one top angle of the walls. The instrument carriage is manually operated.

Head Tank

The head tank is made of stainless steel and its sides and bottom are curved to ensure smooth flow into the channel. Perforated plates are also provided in the head tank to further smoothen the flow.

Sediment Feeder

The channel bed may be filled by a sediment feeder with a slope stopper upstream and another one just before sediment trap at the downstream end of the channel. Feeding is by a screw.

Sediment Trap

A Sediment trap is provided at the downstream end of the channel. The trapped sediment can be discharged by

 a bottom value. The trap is covered when used as a normal flow channel.

Storage Tank

An underground concrete storage tank is recommended as standard. This tank is to be built by the user. However, above ground tank is available (optional).

Walkway

A steel walkway with a checker plate floor and side rails is provided on both side of the flume for ease of model installation and flow observations.

Circulating Pump

The pump is ceramic coated to minimize wear by sediment abrasion. A mechanical seal is used. A geared butterfly valve is provided to control accurate rate of flow.

Flow measurement

A flow digital display is used. In the case of an underground storage tank, a measuring tank with a calibrated weir is available as an option. The flow rate is controlled by a geared butterfly valve.

Model and Accessories

In the case of no sediment, the channel may be used as a normal tilting flow channel. All accessories and models have side seals to ensure no water seep or leak through the sides of the models. A wide variety of models and accessories are available as an option.

As Sediment Channel:  

  • Fixed smooth bed flow
  • Flow over mobile sand bed
  • Flow structures
  • Local scour
  • Mechanics of sediment transport
  • Bed form hysteresis
  • Depositionary features and fancies
  • Computational work
  • Flow over fixed gravel bed

 

As Tilting Flow Channel:

  • Flow measurement
  • Hydraulic jump
  • Analysis of model structures
  • Gauging structures
  • Velocity profile
  • Continuity and energy equations
  • Similarity laws
  • Roughened bed characteristics
  • Surge propagation
  • Channel size
: 600 mm wide, 700 mm high   
  • Channel length
: 18 m (12 m length can be supplied on request)   
  • Total length
:  Additional length 3 m for head and storage tanks.   
  • Tilting adjustment
: -0.5 to +2%   
  • Side walls
: Tempered glass   
  • Channel bed
:  Stainless steel   
  • Sediment feeder     
:  Motorized   
  • Sediment trap         

:  Stainless steel with cover and sediment recovery system

   
  • Water storage tank

:  Underground tank to be provided by user. Aboveground tank is optional

   
  • Head tank
:  Stainless steel   
  • Sluice gate
:  Stainless steel, rack and pinion type, built-in at downstream end of flume   
  • Pump      
:  1   
  • Flow measurement
:  Flow digital display   
  • Instrument trolley
:  Manual operated   
  • Power supply
:  380 V, 3 Ph, 50 Hz. Other power supply is available on request.   
  • Shipping Dimensions: One 40 ft. container (without storage tank)
  • HF566S                               

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF560-001A
Motorized instrument trolley instead of manual operated trolley
  • HF560-002
Above ground storage tank, fiber glass or stainless steel, with lids

As A Sediment Flow Channel:

  • HF566-010                
Sediment drying oven.                                                                                                                              

As A Tilting Flow Channel:

  • HF566-017
Flow calibration tank
  • HF566-019
Stainless steel vernier hook and point gauge with vertical and horizontal movement
  • HF566-020
Basic weir plate with stainless steel 60˚ V notch and rectangular notch weir attachment.
  • HF566-022
Sharp crested weir
  • HF566-023
Broad crested weir, sharp edges
  • HF566-023A
Round edge attachment for HF560-023
  • HF566-024
Crump weir
  • HF566-025
Trapezoidal weir
  • HF566-030                      
Ogee weir with consisting of base profile unit both upstream and downstream pressure tappings and manometer board
  • HF566-031
Dam spillway consisting of base profile unit with different interchangeable downstream sections:
 - Toe, ski jump, piers and pegs, gravel box, or stop logs
  • HF566-032
USBR type 2,3 or 4 energy dissipater
  • HF566-033
Syphon spillway
  • HF566-034
Bridge pier, round or square edge
  • HF566-035
Culvert fittings, round or square, horizontal or drop inlet with or without entrance flare
  • HF566-036
Vibration pile
  • HF566-040
Venturi flume
  • HF566-041
Parshall flume
  • HF566-042
Submerged orifice made from stainless steel on plastics
  • HF566-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF566-052
Radial gate, rack and pinion drive with stainless steel attachment
  • HF566-060
Pitot tube with manometer board for measurement of flow velocity and various channel sections
  • HF566-061
Current meter
  • HF566-065
Lift and drag balance and models, large and small cylinders and aerofoil section
  • HF566-070
Roughened bed, gravel, sand, or corrugated
  • HF566-075R
Sediment transport study system with sediment recirculating system

 

In this case, pump will be cover with ceramic for corrosion prevention.
  • HF566-080
Wave generator with variable speed geared motor
  • HF566-080F
Full randomly wave generator

 

This include HF560-082 and HF560-080M.
  • HF566-080M
Wave measuring system
  • HF566-082
Absorbing beach, plain, roughened, or permeable
  • HF566-085
End tank, stainless steel, at downstream end of flume
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF566S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 560 TILTING FLOW CHANNEL, 600 mm wide

HF 560 TILTING FLOW CHANNEL, 600 mm wide

Enquiry

Video

Download

The channel is designed for studying the hydraulic flow phenomena. It is a service unit to be used with optional accessories and models. Instruction manual is also included.

 

Under Frame

The channel bed rests on twin I-beam under frame which ensures static loading deflections are kept to a minimum. The length of the I-beam is about 6 m. Each section is shipped with glass side walls. This simplifies site installation as there are only two joints and is easier to ensure straight side walls throughout the length. To ensure minimum deflection, the I beam base frame of 18 m. is supported by a fulcrum at the middle and adjustable height supports of both upstream and downstream ends for a total of 3 supports.

 

Slope Adjustment

Each adjustable height support uses twin screws and with a system of worm and wheel gear boxes and miter gears which are intern driven by a motor. A slope scale is provided at one end of the flume.

 

Channel Bed

The channel bed is made of stainless steel with twin screw holes of equal distance along the channel length to hold accessories or models to the flume bed. These holes can also be used for pressure tapping to measure pressure loss along the channel length.

 

Side Walls

For safety reasons, the side walls are made of tempered glass or clear acrylic. The walls are supported at interval by brackets with screws for vertical position adjustment.

 

Instrument Carriage

Top rails made of stainless steel tubes are attached to the top angle on each wall of the channel. Screws supporting the rails can be adjusted to ensure uniform height and in a straight line. A scale graduated in mm. is attached along the full length of one top angle of the walls. The instrument carriage is manually operated.

 

Head Tank

The head tank is made of stainless steel and its sides and bottom are curved to ensure smooth flow into the channel. Perforated plates are provided in the head tank to further smoothen the flow.

 

Storage Tank

An underground concrete storage tank is recommended as standard. This tank is to be built by the user. However, above ground storage tank is available (optional).

 

Walkway

A steel walkway with a checker plate floor and side rail is provided on one side of the flume for ease of model installation and flow observations.

 

Circulating Pump

The pump seal is mechanical. A geared butterfly valve is provided to control an accurate flow rate.

 

Flow measurement

A flow digital display is used. In the case of an underground storage tank, a measuring tank with calibrated weir is available as an option. The flow rate is controlled by a geared butterfly valve.

 

Model and Accessories

All accessories and models have side seals to ensure no water seepage or leakage through the sides of the models. A wide variety of models and accessories are available as option.

  • Flow measurement

  • Hydraulic jump

  • Analysis of model structures

  • Gauging structures

  • Velocity profile

  • Continuity and energy equations

  • Similarity laws

  • Roughened bed characteristics

  • Surge propagation

  • Wave generation and absorption

  • Channel size
: 600 mm wide, 700 mm high   
  • Channel length
: 18 m (12 m length can be supplied on request)   
  • Total length
:  Additional length 34 m for head and storage tanks.   
  • Tilting adjustment
: -0.5 to +2%   
  • Side walls
: Tempered glass   
  • Channel bed
:  Stainless steel   
  • Water storage tank
: Underground tank to be provide by user.   
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel   
  • Pump
:  1   
  • Flow measurement
:  Water meter with stop watch.   
  • Instrument trolley
:  Manual operation   
  • Power supply
: 380 V, 3 Ph, 50 Hz Other power supply is available on request.   
  • Shipping Dimensions: One 40 ft. container (without storage tank)
  • HF560S                                

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF560-001A
Motorized instrument trolley instead of manually operated trolley
  • HF560-002
Above ground storage tank, 12 m3
  • HF560-017
Flow calibration tank consisting of two sections where water is discharged into the first section and flows through stilling partition before discharging via calibrated weir into underground tank.
  • HF560-019
Stainless steel vernier hook and point gauge 0-600 mm with 0.05 mm reading or 1 mm graduation
  • HF560-020
Basic weir plate with stainless steel 90˚V notch and rectangular notch weir attachment
  • HF560-022
Sharp crested weir
  • HF560-023
Broad crested weir, sharp edges
  • HF560-023A
Round edge attachment for HF560-023
  • HF560-024
Crump weir
  • HF560-025
Trapezoidal weir
  • HF560-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF560-031
Dam spillway consisting of base profile unit with different interchangeable downstream sections:
 - Toe, ski jump, piers and pegs, gravel box, or stop logs.
  • HF560-032
USBR type 2,3 or 4 energy dissipater.
  • HF560-033
Syphon spillway made from clear acrylic and PVC.
  • HF560-034
Bridge pier, round or square edge
  • HF560-035
Culvert fittings, round or square, horizontal or drop inlet with or without entrance flare
 Tube is made from clear acrylic
  • HF560-036
Vibration pile
  • HF560-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF560-041
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF560-042
Submerged orifice made from stainless steel on plastics.
  • HF560-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF560-052
Radial gate, rack and pinion drive with stainless steel attachment.
  • HF560-060
Pitot tube with manometer board for measurement of flow velocity and various channel sections.
  • HF560-061
Current meter
  • HF560-065
Lift and drag balance and models, large and small cylinders and aerofoil section.
  • HF560-070
Roughened bed, gravel, sand, or corrugated
  • HF560-075R
Sediment transport study system with sediment recirculating system
 In this case, pump will be cover with ceramic for corrosion prevention.
  • HF560-080
Wave generator with variable speed geared motor, maximum stroke 30 cm
  • HF560-080F
Full randomly wave generator
 This include HF560-082 and HF560-080M.
  • HF560-080M
Wave measuring system
  • HF560-082
Absorbing beach, plain, roughened, or permeable.
  • HF560-085
End tank, stainless steel, at downstream end of flume.
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF560S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 530 TILTING FLOW CHANNEL, 300 mm wide

HF 530 TILTING FLOW CHANNEL, 300 mm wide

Enquiry

Download

The channel is designed for studying the hydraulic flow phenomena. It is a service unit to be used with optional accessories and models below. Instruction manual is also included.

 

Under Frame

The channel bed rests on twin beam under frame which ensures static loading deflections are kept to a minimum. Each section is shipped with glass side walls. This simplifies site installation as there is only one joint and is easier to ensure alignment of the channel. The beams are supported by a fulcrum at one end and an adjustable height support at the other end.

 

Slope Adjustment

The adjustable height support uses twin screws. Each screw is driven by a worm and wheel gear box with a common motor. A slope scale is provided at one end of the flume.

 

Channel Bed

The channel bed is made of stainless steel with screw holes of equal distance along the channel length to hold accessories or models to the channel bed. These holes can also be used for pressure tapping to measure pressure loss along the channel length.

 

Side Walls

For safety reasons, the side walls are made of tempered glass or clear acrylic. The walls are supported at interval by brackets with screw adjustment to ensure that the channel wall is straight and vertical.

 

Instrument Carriage

Top rails made of stainless steel tubes are attached to the top angle on each wall of the channel. Screws supporting the rails can be adjusted to ensure uniform height and in a straight line. A scale graduated in mm. is attached along the full length of one top angle of the walls. The instrument carriage is manually operated.

 

Head Tank

The head tank is made of stainless steel and bottom slope to ensure smooth flow into the channel. Perforated sheets are also provided in the head tank to further smoothen the flow.

 

Storage Tank

The storage tank has adequate water to fill the full channel. Fiber glass storage tank(s) is provided at downstream end of the channel. Capacity of tank varies according to channel length.

 

Model Installation

A mobile ladder is used. In the case of small fiber glass tanks (optional) are used, the top covers of the tanks (optional) are used as a walkway and model installation.

 

Circulating Pump

The pump seal is mechanical. A geared butterfly valves is provided for accurate flow control.

 

Flow measurement

A flow digital display is used for easy observation on flow adjustment. A water meter is available as an option and may be used as a reference for flow indicator setting later.

 

Model and Accessories

All accessories and models have side seals to ensure no water seepage or leakage through the sides of the models. A wide variety of models and accessories are available as an option.

  • Flow measurement

  • Hydraulic jump

  • Analysis of model structures

  • Gauging structures

  • Velocity profile

  • Continuity and energy equations

  • Similarity laws

  • Roughened bed characteristics

  • Surge propagation

  • Wave generation and absorption.

  • Channel size
: 300 mm wide, 450 mm high
  • Channel length
: 12 m working section (Other length, i.e. 6, 8, 10, 12.5 m, can be supplied on request.)
  • Total length
:  Additional length 3 m for head and storage tanks.
  • Tilting adjustment
:  -1% to +3%
  • Side walls
: Tempered glass
  • Channel bed
:  Stainless steel
  • Water storage tank
:  2 ea.
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel
  • Pump
:  1
  • Flow measurement
:  Water meter with stop watch.
  • Instrument trolley
:  Manual operation
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Shipping Dimensions: One 40 ft. container (without storage tank)
  • HF530S                                           

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF530-001A
Motorized instrument trolley instead of manually operated trolley
  • HF530-005
Small on ground fiber glass tanks connected in series along are side of the channel with checked plate lid as walk way. In this case, the mobile ladder is not required.
  • HF530-015
Flow measuring tank. The graduated tank is on a steel frame on wheels with a trough to take up water from the flume and a pump to return water to the storage tank.
  • HF530-016
Water meter
  • HF530-019
Stainless steel vernier hook and point gauge 450 mm with 0.05 mm reading graduation
  • HF530-019A
Stainless steel hook and point gauge 450 mm x 0.5 mm scale
  • HF530-020
Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment
  • HF530-022
Sharp crested weir
  • HF530-023
Broad crested weir, sharp edges
  • HF530-023A
Round edge attachment for HF530-023
  • HF530-024
Crump weir
  • HF530-025
Trapezoidal weir
  • HF530-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF530-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

- Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF530-032
USBR type 2,3 or 4 energy dissipater
  • HF530-033
Syphon spillway made from clear acrylic and PVC
  • HF530-034
Bridge pier, round or square edge
  • HF530-035

Culvert fittings, round or square , horizontal or drop inlet with or without entrance flare

Tube is made from clear acrylic

  • HF530-036
Vibration pile
  • HF530-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF530-041
Parshall flume made from clear acrylic with stainless steel attachment.
  • HF530-042
Submerged orifice made from stainless steel on plastics.
  • HF530-043
Trapezoidal flume made from clear acrylic.
  • HF530-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF530-052
Radial gate, rack and pinion drive with stainless steel attachment
  • HF530-060
Pitot tube with manometer board for measurement of flow velocity and various channel sections
  • HF530-061
Current meter
  • HF530-065
Lift and drag balance and models, large and small cylinders and aerofoil section
  • HF530-070
Roughened bed, gravel, sand, or corrugated
  • HF530-075
Sediment transport study system
  • HF530-075R
Sediment transport study system with sediment recirculating system
 In this case, pump will be cover with ceramic for corrosion prevention.
  • HF530-080
Wave generator with 1HP variable speed geared motor
  • HF530-080F
Full randomly wave generator
 This include HF530-082 and HF530-080M.
  • HF530-080M
Wave measuring system
  • HF530-082
Absorbing beach, plain, roughened, or permeable
  • HF530-085
End tank, stainless steel, at downstream end of flume
  • HF530-090
Checker plate walkway along one side of the flume
  • Other accessories and models can be supplied on request.
  • HF530S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS