ST 345 TENSILE MODULUS OF ELASTICITY

ST 345 TENSILE MODULUS OF ELASTICITY

Enquiry

Download

This equipment is used for studying the modulus of elasticity of materials in the form of rods. It is to be used with ST300 Universal Structural Frame (separately supplied) for attachment of the accessories.

The rod is mounted between two gripping heads and a load is applied by means of screw with turning wheel. The load is measured by load cell with force indicator. Elongation of the gauge length is measured by extensometer.

Instruction manual is also included.

  • Modulus of elasticity of materials

  • Test rod
:  Mild steel, brass and aluminum
  • Test rod holders
:  2
  • Extensometer with output
:  1
  • Loading device
:  Screw with a turning wheel
  • Force measurement
:  Load cell with ST 150 Force Indicator
  • Power supply
:  220 V, 1 Ph, 50Hz. or as required
  
  
  
  
  
  
  
  • Net (unassembled) Shipping Dimensions WxLxH: 30 x 55 x 20 cm
  • Net Weight:  Approx. 5 kg
  • ST345S 
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • ST345S   
Learning Software
                                 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

ST 343 STRAIN GAUGES

Enquiry

Download

The apparatus demonstrates the use of electrical resistance strain gauge in measuring strain of material under bending, torsion or combined bending and torsion stresses. It is to be used with ST305 Universal Base Frame (separately supplied) for attachment of the accessories.

Two specimens are used. The specimen is mounted horizontally on a support column at one end. A cantilever beam for bending load, a rod with torsion arm for bending and torsion load and a strip for tension load. Strain gauges are placed on to the specimens. Each strain gauge is wired to form a full bridge with temperature compensation and zero adjustment. Strain is indicated on the strain indicator.

Instruction manual is also included.

  • Fundamentals of measuring with strain gauges

  • Correlation between mechanical strain and electrical resistance in a strain gauge

  • Calculation of the mechanical deformations under bending, torsion or combined bending and torsion

  • Test beams with Strain Gauge
:  Aluminum beam for bending test
 :  Aluminum rod with arm for torsion test
  • ST 113 Built-in/knife edge support
:  1
  • ST 151 Strain indicator
:  1
  • Load hanger
:  1
  • Weights
:  1 lot
  • Power supply
:  220 V, 1 Ph, 50Hz. or as required
  
  
  
  
  
  
  • Net (unassembled) Shipping Dimensions WxLxH: 70 x 90 x 20 cm
  • Net Weight:  Approx. 20 kg
  • ST343S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • ST343-055
Computer Assist (computer not included)
                                    This includes ST343S and significant sensor(s) with data acquisition (capture, display, graph and/or data export) instead of analog measuring instrument(s), additional software function for real-time data logging with computer assist unit and WiFi feature for data logging and display remotely on smartphone (iOS and Android)
  • ST343S   
Learning Software
                                 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

ST 340 STRAIN AND STRESS IN A BEAM

ST 340 STRAIN AND STRESS IN A BEAM

Enquiry

Video

Download

The apparatus demonstrates the use of electrical resistance strain gauge in measuring strain of material under stress. It is to be used with ST300 Universal Structural Frame or ST305 Universal Base Frame (separately supplied) for attachment of the accessories.

A beam is simply supported at both ends. Strain gauge(s) are fixed at different locations of the beam specimen. Each strain gauge is wired to form a full bridge with temperature compensation and zero adjustment. Load is applied by a load hanger and weights. Strain(s) are measured by a strain indicator.

Instruction manual is also included.

  • Examination of the relationship between stress and strain

  • Finding the neutral axis

  • The effect of beam cross-section to the second moment of area and neutral axis

  • Test beams
: Aluminium, different shapes
  • ST 113 Built-in/Knife Edge Supports
: 2
  • ST 151 Strain Indicator
: 1
  • Load hanger
: 1
  • Weights
: 1 lot
  • Power supply
: 220 V, 1 Ph, 50Hz. or as required
  
  
  
  
  
  
  
  • Net (unassembled) Shipping Dimensions WxLxH: 70 x 80 x 20 cm
  • Net Weight:  Approx. 12 kg
  • ST340S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • ST340-055
Computer Assist (computer not included)
                                    This includes ST340S and significant sensor(s) with data acquisition (capture, display, graph and/or data export) instead of analog measuring instrument(s), additional software function for real-time data logging with computer assist unit and WiFi feature for data logging and display remotely on smartphone (iOS and Android)
  • ST340S   
Learning Software
                                 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS