HF 515A TILTING FLOW CHANNEL, 150 mm wide, Adjustable bed

     Fluid mechanics > Tilting flow channels

HF 515A TILTING FLOW CHANNEL, 150 mm wide, Adjustable bed

Enquiry

Video

Download

The settlement of river water sediments over a long period of time results is a shallow river bed. Occasional dredging may be required to deepen the river bed for navigation purpose. The adjustable bed flow channel allows a study of flow under the simulated shallow and deepened river bed.

This is a self contained open channel designed for studying flow phenomena with change in bed slope. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full observation and are supported by adjustable steel brackets to ensure accurate wall alignment.  Tilting can be adjusted by a manual screw jack. The middle section of the bed can be adjusted manually upward or downward by a screw. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.

Instruction manual is also included.

  • Open channel flow

  • Flow measurement

  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Channel size
:  150 mm wide, 350 mm high   
  • Channel length
:  5 m (Extended length can be supplied on request.)   
  • Tilting adjustment
:  -1% to +3%   
  • Side walls
: Clear acrylic or tempered glass, with clear vertical scale   
  • Channel bed
:  Stainless steel   
  • Bed adjustment
: Upward and downward   
  • Water storage tank
:  1   
  • Head tank
:  Stainless steel   
  • Pump      
:  1   
  • End tank
:  Stainless steel   
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel   
  • Flow measurement
:  Water meter with stop watch.   
  • Power supply

:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

   
  • Net (unassembled) Shipping Dimensions WxLxH: 100 x 700 x 160 cm
  • Net Weight:  Approx. 620 kg
  • HF515AS                                    

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF515-019
Stainless steel vernier hook and point gauge 300 mm x 0.05 mm reading
  • HF515-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF515-020
Basic weir plate with stainless steel 60˚ V notch and rectangular notch weir attachment
  • HF515-022
Sharp crested weir
  • HF515-023
Broad crested weir, sharp edges
  • HF515-023A
Round edge attachment for HF515-023
  • HF515-024
Crump weir
  • HF510-025
Trapezoidal weir
  • HF515-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF515-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF515-033
Syphon spillway made from clear acrylic and PVC
  • HF515-034
Bridge pier, round or square
  • HF515-035
Culvert fittings: round or square , horizontal or drop inlet with or without entrance flare
  • HF515-036
Vibration pile
  • HF515-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF515-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF515-051
Sluice gate, sliding type with stainless steel attachment
  • HF515-052
Radial gate, rack and pinion drive, with stainless steel attachment
  • HF515-060
Pitot tube with manometer board for measurement of flow velocity at various channel actions
  • HF515-061
Current meter
  • HF515-070
Roughened bed, gravel, sand, or corrugated, 1.2 m
  • HF515-080
Wave generator with variable speed geared motor
  • HF515-081
Motorized tilting
  • HF515-082
Absorbing beach, plain, roughened, or permeable, 1.2 m
  • HP010
Flow digital display
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF515AS                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 515 TILTING FLOW CHANNEL, 150 mm wide

HF 515 TILTING FLOW CHANNEL, 150 mm wide

Enquiry

Video

Download

This is a self contained open channel designed for studying a flow phenomena. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full observation and are supported by adjustable steel brackets to ensure accurate wall alignment.  Tilting can be adjusted by a manual screw jack. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.

Instruction manual is also included.

  • Open channel flow

  • Flow measurement

  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Channel size
:  150 mm wide, 350 mm high
  • Channel length
:  5 m (Extended length can be supplied on request.)
  • Tilting adjustment
:  -1% to +3%
  • Side walls
: Clear acrylic or tempered glass, with clear vertical scale
  • Channel bed
:  Stainless steel
  • Water storage tank
:  1
  • Head tank
:  Stainless steel
  • Pump
:  1
  • End tank
:  Stainless steel
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel
  • Flow measurement
:  Water meter with stop watch.
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 100 x 700 x 160 cm
  • Net Weight:  Approx. 620 kg
  • HF515S                                    

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF515-019
Stainless steel vernier hook and point gauge 300 mm x 0.05 mm reading
  • HF515-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF515-020
Basic weir plate with stainless steel 60˚ V notch and rectangular notch weir attachment
  • HF515-022
Sharp crested weir
  • HF515-023
Broad crested weir, sharp edges
  • HF515-023A
Round edge attachment for HF515-023
  • HF515-024
Crump weir
  • HF510-025
Trapezoidal weir
  • HF515-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF515-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF515-033
Syphon spillway made from clear acrylic and PVC
  • HF515-034
Bridge pier, round or square
  • HF515-035
Culvert fittings: round or square , horizontal or drop inlet with or without entrance flare
  • HF515-036
Vibration pile
  • HF515-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF515-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF515-051
Sluice gate, sliding type with stainless steel attachment
  • HF515-052
Radial gate, rack and pinion drive, with stainless steel attachment
  • HF515-060
Pitot tube with manometer board for measurement of flow velocity at various channel actions
  • HF515-061
Current meter
  • HF515-070
Roughened bed, gravel, sand, or corrugated, 1.2 m
  • HF515-080
Wave generator with variable speed geared motor
  • HF515-081
Motorized tilting
  • HF515-082
Absorbing beach, plain, roughened, or permeable, 1.2 m
  • HP010
Flow digital display
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF515S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 510A TILTING FLOW CHANNEL,100 mm. wide, Adjustable bed

HF 510A TILTING FLOW CHANNEL,100 mm. wide, Adjustable bed

Enquiry

Video

Download

This is a self-contained open channel designed for studying flow phenomena. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full visual observation and are supported by adjustable steel brac

The settlement of river water sediments over a long period of time results is a shallow river bed. Occasional dredging may                  be required to deepen the river bed for navigation purpose. The adjustable bed flow channel allows a study of flow under the simulated shallow and deepened river bed.

kets to ensure accurate wall alignment.  Tilting can be adjusted by a manual screw jack. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.

Instruction manual is also included.

This is a self-contained open channel designed for studying flow phenomena with a change in bed slope. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by a rectangular steel frame. Side walls are transparent to allow full visual observation and are supported by adjustable steel brackets to ensure accurate wall alignment.  Tilting can be adjusted by a manual screw jack. The middle section of the bed can be adjusted manually upward or downward by a screw. A head tank with a stilling baffle provides smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.

Instruction manual is also included.

  • Open channel flow

  • Flow measurement

  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Critical depth and its influences on upstream water levels

  • Channel size
:  100 mm wide, 300 mm high   
  • Channel length
:  4 m (Extended length can be supplied on request.)   
  • Tilting adjustment
:  -2% to +5%   
  • Side walls
:  Clear acrylic tempered glass with clear vertical scale   
  • Channel bed
:  Stainless steel   
  • Bed adjustment
:  Upward or downward   
  • Water storage tank
:  1   
  • Pump
:  1   
  • Head tank
:  Stainless steel   
  • End tank
:  Stainless steel   
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel   
  • Flow measurement
:  Water meter with stop watch.   
  • Power supply

:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

   
  • Net (unassembled) Shipping Dimensions WxLxH: 80 x 500 x 150 cm
  • Net Weight:  Approx. 440 kg
  • HF510AS                                         

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF510-019
Stainless steel vernier hook and point gauge 300 mm x 0.05 mm reading
  • HF510-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF510-020
Basic weir plate with stainless steel 60˚ V notch and rectangular notch weir attachment
  • HF510-022
Sharp crested weir
  • HF510-023
Broad crested weir, sharp edges
  • HF510-023A
Round edge attachment for HF510-023
  • HF510-024
Crump weir
  • HF510-025
Trapezoidal weir
  • HF510-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF510-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF510-033
Syphon spillway made from clear acrylic and PVC
  • HF510-034
Bridge pier, round or square
  • HF510-035
Culvert fittings: round or square , horizontal or drop inlet with or without entrance flare
  • HF510-036
Vibration pile
  • HF510-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF510-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF510-051
Sluice gate, sliding type with stainless steel attachment
  • HF510-052
Radial gate, rack and pinion drive, with stainless steel attachment
  • HF510-060
Pitot tube with manometer board for measurement of flow velocity at various channel actions
  • HF510-061
Current meter
  • HF510-070
Roughened bed, gravel, sand, or corrugated
  • HF510-080
Wave generator with variable speed geared motor
  • HF510-082
Absorbing beach, plain, roughened, or permeable, 1.2 m
  • HP010
Flow digital display
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF510AS                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 510 TILTING FLOW CHANNEL,100 mm. wide

HF 510 TILTING FLOW CHANNEL,100 mm. wide

Enquiry

Video

Download

This is a self-contained open channel designed for studying flow phenomena. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full visual observation and are supported by adjustable steel brackets to ensure accurate wall alignment.  Tilting can be adjusted by a manual screw jack. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.

Instruction manual is also included.

  • Open channel flow

  • Flow measurement

  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Critical depth and its influences on upstream water levels

  • Channel size

:  100 mm wide, 300 mm high

   
  • Channel length
:  4 m (Extended length can be supplied on request.)   
  • Tilting adjustment
:  -2% to +5%   
  • Side walls

:  Clear acrylic tempered glass with clear vertical scale

   
  • Channel bed
:  Stainless steel   
  • Head tank
:  Stainless steel   
  • End tank
:  Stainless steel   
  • Sluice gate
:  Stainless steel, rack and pinion type, built in at downstream end of the channel   
  • Pump
:  1   
  • Flow measurement
:  Water meter and stop watch   
  • Power supply

:  220V 1 Ph 50 Hz. Other power supply is available on request.

   
     
  • Net (unassembled) Shipping Dimensions WxLxH: 70 x 520 x 160 cm
  • Net Weight:  Approx. 390 kg
  • HF510S                                         

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF510-019
Stainless steel vernier hook and point gauge 300 mm x 0.05 mm reading
  • HF510-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF510-020
Basic weir plate with stainless steel 60˚ V notch and rectangular notch weir attachment
  • HF510-022
Sharp crested weir
  • HF510-023
Broad crested weir, sharp edges
  • HF510-023A
Round edge attachment for HF510-023
  • HF510-024
Crump weir
  • HF510-025
Trapezoidal weir
  • HF510-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF510-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF510-033
Syphon spillway made from clear acrylic and PVC
  • HF510-034
Bridge pier, round or square
  • HF510-035
Culvert fittings: round or square , horizontal or drop inlet with or without entrance flare
  • HF510-036
Vibration pile
  • HF510-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF510-050
Sluice gate, rack and pinion drive with stainless steel attachment
  • HF510-051
Sluice gate, sliding type with stainless steel attachment
  • HF510-052
Radial gate, rack and pinion drive, with stainless steel attachment
  • HF510-060
Pitot tube with manometer board for measurement of flow velocity at various channel actions
  • HF510-061
Current meter
  • HF510-070
Roughened bed, gravel, sand, or corrugated
  • HF510-080
Wave generator with variable speed geared motor
  • HF510-082
Absorbing beach, plain, roughened, or permeable, 1.2 m
  • HP010
Flow digital display
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF510S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 509 OPEN CHANNEL AND CLOSED CHANNEL FLOW

HF 509 OPEN CHANNEL AND CLOSED CHANNEL FLOW

Enquiry

Video

Download

This is a floor standing open channel which can be quickly converted into a closed channel for studying both open and closed channel flow. It is to be used with HB100 Hydraulics Bench (separately supplied)

The channel has transparent side walls with tanks at both ends for supplying water to and receiving water from the channel. Each tank has a flow control valve to control flow and water level in the channel. The inlet tank has a stilling arrangement. A removable lid is placed on top of the open channel to convert it to a closed channel. The mid section of the channel bed is adjustable for demonstration of Bernoulli theorem in closed conduit flow.

Accessories and measuring instruments are provided for the flow study.

Instruction manual is also included.

  • Open Channel Flow               

          -  Flow over sharp crested, broad crested and ogee weirs

          -  Flow under sluice gate

          -  Subcritical, critical and super critical flow

          -  Energy dissipation

          -  Hydraulic jump

  • Closed Channel Flow

          -  Bernoulli and continuity equations

          -  Measurement of static pressure and total pressure

          -  Calculation of flow velocity         

  • Channel size
:  750 mm wide, 150 mm high   
  • Channel length
:  1.2 m   
  • Bed adjustment
:  Up to 75 mm upward   
  • Measuring instruments
    
- Manometer:  1 set.   
- Pitot tubes:  3   
  • Accessories
    
- Sluice gates:  2   
- Weirs:  3   
- Bridge pier:  1   
- Removable lid for closed channel conversion :  1   
- Connecting hose :  1   
  • Net (unassembled) Shipping Dimensions WxLxH: 78 x 163 x 173 cm
  • Net Weight:  Approx. 66.5 kg
  • HF509S                                

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF509-001
Water supply system
 :  0.37 kW pump with storage tank, water meter and hose
 :  Power supply; 220V, 1 Ph, 50 Hz. Other power supply is available on request.
  • HB100N or HB100
Hydraulic Bench, Neo or Hydraulics Bench
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF509S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 508 TILTING FLOW CHANNEL, 75 mm. wide

HF 508 TILTING FLOW CHANNEL, 75 mm. wide

Enquiry

Video

Download

This is a bench top, self contained open channel designed for studying flow phenomena. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by a steel frame. Side walls are transparent to allow full visual observation. Tilting can be adjusted by a manual screw jack. A stainless-steel head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank.

Instruction manual is also included.

  • Flow measurement
  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Channel size
:  75 mm wide, 250 mm high
  • Channel length
:  2.5 m (Extended length can be supplied on request.)
  • Tilting adjustment
:  -2% to + 5%
  • Side walls
:  Clear acrylic with clear vertical scale
  • Channel bed
:  Stainless steel
  • Pump
:  1
  • Water storage tank
:  1
  • Flow measurement
:  Water meter with stop watch.
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 60 x 340 x 90 cm
  • Net Weight:  Approx. 150 kg
  • HF508S            

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF507-019
Stainless steel vernier hook and point gauge 300 mm with 0.05 mm reading
  • HF507-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF507-020
Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment
  • HF507-022
Sharp crested weir
  • HF507-023
Broad crested weir, sharp edges
  • HF507-023A
Round edge attachment for HF507-023
  • HF507-024
Crump weir
  • HF507-025
Trapezoidal weir
  • HF507-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board.
  • HF507-031            

Dam spillway consisting of base profile unit with different interchangeable downstream sections:

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF507-033
Syphon spillway made from clear acrylic and PVC
  • HF507-034
Bridge pier, round or square
  • HF507-035
Culvert fittings, round or square edge
  • HF507-040
Venturi flume made from clear acrylic with stainless steel attachment.
  • HF507-051
Sluice gate, sliding type with stainless steel attachment
  • HF507-052
Radial gate, rack and pinion drive, with stainless steel attachment.
  • HF507-060
Pitot tube with manometer board for measurement of flow velocity at various channel sections.
  • HF507-061
Current meter
  • HF507-070
Roughened bed, gravel, sand, or corrugated
  • HF507-080
Wave generator with variable speed geared motor
  • HP010
Flow digital display
  • Other accessories and models can be supplied on request.

  • Other optional equipment, please contact manufacturer ([email protected])

  • HF508S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 507 TILTING FLOW CHANNEL, 75 mm. wide

HF 507 TILTING FLOW CHANNEL, 75 mm. wide

Enquiry

Video

Download

This is a self contained open channel designed for studying flow phenomena. It is a service unit to be used with optional accessories and models below.

The channel is of rectangular cross section supported by a steel frame. Side walls are transparent to allow full visual observation. Tilting can be adjusted by a manual screw jack. A stainless-steel head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via a stainless-steel end tank.

Instruction manual is also included.

  • Flow measurement
  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Channel size
:  75 mm wide, 250 mm high   
  • Channel length
:  3.0 m (Extended length can be supplied on request.)   
  • Tilting adjustment
:  -2% to + 5%   
  • Side walls
:  Clear acrylic with clear vertical scale   
  • Channel bed
:  Stainless steel   
  • End tank
:  1   
  • Pump
:  1   
  • Water storage tank
:  1   
  • Flow measurement
:  Water meter with stop watch.   
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 70 x 390 x 135 cm
  • Net Weight:  Approx. 170 kg
  • HF507S            

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF507-010
Adjustable Bed
  • HF507-019
Stainless steel vernier hook and point gauge 300 mm with 0.05 mm reading
  • HF507-019A
Stainless steel hook and point gauge 300 mm x 0.5 mm scale
  • HF507-020
Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment
  • HF507-022
Sharp crested weir
  • HF507-023
Broad crested weir, sharp edges
  • HF507-023A
Round edge attachment for HF507-023
  • HF507-024
Crump weir
  • HF507-025
Trapezoidal weir
  • HF507-030
Ogee weir consisting of base profile unit with both upstream and downstream pressure tappings and manometer board
  • HF507-031

Dam spillway consisting of base profile unit with different interchangeable downstream sections :

-  Toe, ski jump, piers and pegs, gravel box, or stop logs

  • HF507-033
Syphon spillway made from clear acrylic and PVC
  • HF507-034
Bridge pier, round or square
  • HF507-035
Culvert fittings, round or square edge
  • HF507-040
Venturi flume made from clear acrylic with stainless steel attachment
  • HF507-051
Sluice gate, sliding type with stainless steel attachment
  • HF507-052
Radial gate, rack and pinion drive, with stainless steel attachment
  • HF507-060
Pitot tube with manometer board for measurement of flow velocity at various channel sections
  • HF507-061
Current meter
  • HF507-070
Roughened bed, gravel, sand, or corrugated
  • HF507-080
Wave generator with variable speed geared motor
  • HF507S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 505 TILTING FLOW CHANNEL, 50 mm wide

HF 505 TILTING FLOW CHANNEL, 50 mm wide

Enquiry

Video

Download

This is a bench top self-contained open channel designed to study flow visualization. It is to be used with optional accessories and models below.

The channel is of rectangular cross section supported by a steel frame. Side walls are transparent to allow full visual observation. Tilting can be adjusted by a manual screw jack. A stainless steel head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank.

Instruction manual is also included.

  • Open channel flow

  • Flow measurement

  • Hydraulic jump

  • Continuity and energy equations

  • Discharge under sluice gate

  • Channel size
:  50 mm wide, 150 mm high
  • Channel length
:  2.0 m (Extended length can be supplied on request.)
  • Tilting adjustment
:  -2% to + 5%
  • Side walls
:  Clear acrylic with clear vertical scale
  • Channel bed
:  Stainless steel
  • Pump
:  1
  • Water storage tank
:  1
  • Flow measurement
:  Water meter with stop watch.
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net (unassembled) Shipping Dimensions WxLxH: 55 x 275 x 80 cm
  • Net Weight:  Approx. 100 kg
  • HF505S                                

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HF505-010 
Adjustable Bed
  • HF505-019
Stainless steel vernier hook and point gauge.
  • HF505-020
Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment.
  • HF505-022
Sharp crested weir
  • HF505-023
Broad crested weir, sharp edges
  • HF505-021A  
Round edge attachment for HF505-023
  • HF505-024
Crump weir
  • HF505-040 

Venturi flume made from clear acrylic with stainless steel attachment.

  • HF505-051

Sluice gate, PVC, manual sliding

  • HF505-054

Cylindrical gate, PVC, manual sliding

  • HF505-060
Pitot tube with manometer
  • HF505-070

Roughened bed, gravel or sand, 0.6 m

  • HP010    
Flow digital display
  • Other accessories and models can be supplied on request.
  • Other optional equipment, please contact manufacturer ([email protected])
  • HF505S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 502 SEDIMENT FLOW CHANNEL, 75 mm. wide

HF 502 SEDIMENT FLOW CHANNEL, 75 mm. wide

Enquiry

Video

Download

This is a self-contained bench top open channel for studying bed forms with change in flow and slope as well as flow phenomena without sediment.

The channel is of a rectangular cross-section supported by steel frame. The channel sides are made of clear acrylic with tilting controlled by a manual screw jack. A stainless-steel head tank with a stilling baffle provides a smooth flow.

The water is discharged from the channel via a built-in rectangular weir to the storage tank. A fine strainer is provided in the storage tank to trap the sand sediment.

Instruction manual is also included.

  • Fixed smooth bed flow

  • Flow over mobile sand bed

  • Flow structures

  • Local scour

  • Mechanics of sediment transport

  • Bed form hysteresis

  • Depositionary features and fancies

  • Computational work

  • Flow over fixed gravel bed

  • Channel size
:  75 mm wide, 150 mm high   
  • Channel length

:  1.5 m (Extended length can be supplied on request.)

   
  • Tilting adjustment
:  0 to +10 %   
  • Channel bed
:  Stainless steel   
  • Side walls
:  Clear acrylic with clear vertical scale   
  • Pump
:  1   
  • Water storage tank
:  1   
  • Sediment
:  Fine grade sand   
  • Standard accessories
:  Sharp crested weir   
 :  Adjustable undershot weir   
 :  Bridge pier   
  • Hook and point gauge
:  1   
  • Flow measurement
:  Water meter and stop watch   
  • Power supply
:  220 V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 55 x 275 x 80 cm
  • Net Weight:  Approx. 92 kg
  • HF502S
Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HP010
Flow digital display
  • Washed sand 10 kg (Due to export laws and regulations, washed sand cannot be exported. Buyer should source it locally.)

  • Other optional equipment, please contact manufacturer ([email protected])

  • HF502S                        
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

HF 501 SEDIMENT BED AND FLOW VISUALIZATION TANK

HF 501 SEDIMENT BED AND FLOW VISUALIZATION TANK

Enquiry

Video

Download

The equipment is a self-contained unit designed to study the mobile bed formation and two-dimensional flow observation.

The unit consists of;

      .    Head tank with perforated plate to minimize turbulence and smoothen the flow.

      .    The working section containing sand is for study of the mobile bed formation and to observe two dimensional flow patterns. Wire mesh is provided to contain the sand. Plastics plates are used when two-dimensional flow is to be observed.

      .    The storage tank collects discharge from the working section and acts as a reservoir. An adjustable overshot weir is provided to control the water level in the working section.  The tank also has a sand trap to collect the over-spilled sand.

      .    A pump to draw water from the storage tank and deliver it to the head tank. A water meter with a flow control valve are also supplied.

      .    An instrument carriage traveling on stainless steel tube rails attached to the edges of the working section is designed such that the carriage can travel length wise and crosswise over the working section. A stainless steel vernier hook and point gauge is attached to the carriage to measure the sand profile level.

      Various accessories are supplied to simulate different flow obstructions and diversions. An aluminium dust or equal is supplied for two-dimensional flow observations.

Instruction manual is also included.

  • Sand bed formation under various flow rates

  • Erosion of sand bed around piers or branch canal

  • Two-dimensional flow pattern around pier and branch canal

  • Head tank
:  1   
  • Working section
:  Stainless steel, 610 mm wide, 2000 mm long and 150 mm high   
  • Instrument carriage with two direction rails.
    
  • Hook and point gauge
:  1   
  • Pump
:  1   
  • Flow measurement
:  Water meter with stop watch   
  • Accessories
    
-  Plastic:  Plates   
-  Bridge piers:  Rectangles   
 :  Rounded ends   
 :  Profiled ends   
 :  Cylinders   
-  Aerofoil:  Symmetry   
 :  Asymmetry   
-  Sections for flow direction:  Channels   
 :  Tees   
 :  Angles   
 :  Bell month entries   
 

:  Channel walls with different dimension             

   
-  Aluminum dust or equal     :  1 bottle   
  • Power supply
:  220V, 1 Ph, 50 Hz. Other power supply is available on request.   
  • Net (unassembled) Shipping Dimensions WxLxH: 75 x 395 x 100 cm
  • Net Weight:  Approx. 450 kg
  • HF501S               
Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
  • HF501-001A
Stainless steel storage tank instead of standard tank
  • HF501-002
Working section extension (2 m long) with water storage tank
  • HP010
Flow digital display
  • Washed sand, 200 kg (Due to export laws and regulations, washed sand cannot be exported. Buyer should source it locally.)

  • HF501S                     
: Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS