Category Archives: Thermodynamics

TH 260 BOILING HEAT TRANSFER UNIT

Posted on by

Thermodynamics > Heat transfer

TH 260 BOILING HEAT TRANSFER UNIT

Enquiry

Video

Download

This is a table top unit for observation of evaporation process in a heated tank.

The unit consists of a transparent tank, enclosed at top and bottom. At the bottom of the tank is a small heating cylinder and a special liquid simulating a fire tube heating water in a boiler. The vapor is condensed by a water cooled condenser at the top of the tank and the condensed liquid returns to the bottom for reboiling.

Instruments are provided for measurement of temperatures, pressure, cooling water flow rate, and input power.

  • Observation of evaporation forms.

     

  • Determination of heat transfer efficient.

     

  • Effect of pressure and temperatures on evaporation.

  • Tank
- Borosilicate glass : 130 mm inside diameter
- Height : 300 mm
  • Heater
- Power : 320 W with dimmer switch.
  • Heater surface temperature control unit
 : 1
  • Condenser
- Size : 80 mm diameter copper coil
  • Safety features
- Pressure relief valve : 1 adjustable
- Pressure switch : 1 adjustable
  • Boiling liquid
 : Low boiling point liquid
  • Measuring instruments
- Pressure : Pressure gauge 0-3 kg/cm2
- Flow rate (cooling water) : Maximum approx. 1.2 Lpm rotameter or equal
- Input power : Watt meter
- Sensors with digital display : : Temperature for heater surface, boiling liquid, vapor, and cooling water inlet and outlet
- Temperature control unit to limit temperature of heater surface.
  • Power supply
 : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.
 

Net (unpacked) shipping dimensions WxLxH  : 47 x 77 x 87 cm

Net weight  : Approx. 34 kg

  • TH260S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH260-001
Cooling pail for ice water for operation at high room temperature.
  • TH260-050
Computer Interface (computer not included)
 This includes TH260S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display
 remotely on smartphone (iOS and Android)

  • TH260S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 251 DEMONSTRATION COOLING TOWER

Posted on by

Thermodynamics > Heat transfer

TH 251 DEMONSTRATION COOLING TOWER

Enquiry

Video

Download

This is a cooling tower demonstration unit.

Water is heated in the storage tank, pumped through a flow meter and sprayed at the top of the tower. The packing in the tower breaks the water into thin films and droplets. The water is cooled mainly by evaporation and drops to the bottom tank. Makeup water is admitted to the storage tank through a float valve. A small blower with a flow control valve is connected to the bottom tank, and air is driven upwards through the column and exhausted at the top.

Instrument are provided for measurement air flow rate, water flow rate, pressure drop across the cooling tower, temperature and moisture of the inlet and outlet air.

Instruction manual is also included.

  • Observation of water flow patterns and distribution.

     

  • Measurement of water and air flow rates, temperatures and    humidity.

     

  • Application of steady flow equation to energy balance.

     

  • Cooling tower performance at various air and water flow rates with different inlet water temperatures.

  • Packed column
 : 150 mm x 150 mm x 600 mm high in transparent front cover with 100 m2/m3 plate packing
  • Blower
 : Maximum flow rate over 3 m3/min
  • Hot water pump
 : Maximum flow rate over 20 Lpm
  • Heater
 : 1500 W
  • Storage tank
 : Stainless steel
  • Makeup water tank
 : PVC
  • Temperature control unit to limit hot water temperature
  • Stainless steel hot water tank level switch to prevent heater operation if level is too low.
  • Measuring instruments
- Airflow rate : Inlet orifice plate
- Pressure drop : Twin inclined water manometer (one for air flow rate) 0-450 mm x 1 mm graduation with
multiple slope 1:10, 1:5, and 1:2 for pressure drop across the column
- Water flow rate : Variable area flow meter
- Sensors with digital display : Temperature for water inlet and outlet
: Temperature / humidity sensors for air inlet and outlet
  • Power supply
 : 220 V, 1 Ph, 50Hz. Other power supply is available on request.
 

Net (unpacked) shipping dimensions WxLxH  : 70 x 140 x 140 cm

Net weight  : Approx. 120 kg (w/o spare column)

  • TH251S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH251-001

Bare column for preparing other experiment.

  • TH251-002
Plate packing 70 m2/ m3
  • TH251-003
Plate packing 150 m2/ m3
  • TH251-004
Plate packing 200 m2/ m3
  • TH251-005
Wooden packing 100 m2/m3
  • TH251-006
Special packed column with additional data ports for wet bulb, dry bulb, and water temperatures at three levels.
  • TH251-010A
Anemometer, 1-10 m/s, instead of inlet orifice with inclined water manometer.
  • TH251-050
Computer Interface (computer not included)
 This includes TH251S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 

additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)

  • TH251-060
Computer Control (computer not included)
 This includes TH 251-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • TH251S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 241 MULTI HEAT EXCHANGER, Transparent Casing

Posted on by

Thermodynamics > Heat exchangers

TH 241 MULTI HEAT EXCHANGER, Transparent Casing

Enquiry

Video

Download

The apparatus is used for studying of three types of heat exchangers namely-concentric tube, shell and tube, and plate-under parallel or counter flow conditions.

The unit consists of the three heat exchangers, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Selection of the heat exchanger is simply by opening a valve and changing from parallel to counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Comparison of heat transfer coefficients for concentric tube, shell and tube, and plate heat exchanger.

     

  • Demonstration of heat transfer under parallel or counter flow.

     

  • Demonstration of batch type heat transfer for jacketed vessel (optional).

     

  • Determination heat transfer coefficient.

     

  • Effects of flow rate and temperature difference

  • Heat exchanger:
  
- Concentric tube: Transparent casing (borosilicate glass) with stainless steel inner tube 
 : Total heat transfer area 225 cm2 (approx.) 
- Shell and tube: Transparent casing (borosilicate glass) with stainless steel 7 inner tubes 
 : Total heat transfer area 225 cm2 (approx.) 
- Plate: Stainless steel multiple plates 
 : Total heat transfer area 1200 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low. 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water mid-section of concentric tube 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 110 x 65 cm

Net weight  : Approx. 37 kg

  • TH241S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH240-231
Stainless steel jacketed vessel with coil and stirrer
- Vessel content: 2.5 L
- heat transfer area: 600 cm2 (approx.) for Jacket
 : 350 cm2 (approx.) for Coil
- Stirrer: 0- 500 rpm
- Additionaltemperature sensors for vessel content and water outlet
  • TH240-050
Computer Interface (computer not included)
 This includes TH240S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH240-060   
Computer Control (computer not included)
 This includes TH 240-050 with the additional accessories for control function and additional
 software function for equipment controls by computer
  • TH241S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 240 MULTI HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 240 MULTI HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying of three types of heat exchangers namely-concentric tube, shell and tube, and plate-under parallel or counter flow conditions.

The unit consists of the three heat exchangers and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Selection of the heat exchanger is simply by opening a valve and changing from parallel to counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Comparison of heat transfer for concentric tube, shell and tube, and plate heat exchanger.

     

  • Demonstration of heat transfer under parallel or counter flow.

     

  • Demonstration of batch type heat transfer for jacketed vessel (optional).

     

  • Determination heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Concentric tube: Insulated stainless steel outer with inner tubes 
 : Total heat transfer area 600 cm2 (approx.) 
- Shell and tube: Insulated stainless steel shell with 7 stainless steel inner tubes 
 : Total heat transfer area 600 cm2 (approx.) 
- Plate: Stainless steel, multiple plates 
 : Total heat transfer area 1200 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water mid-section of concentric tube 
  • Temperature control unit to limit temperature of hot water to not more than 80°C
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request

Net (unpacked) shipping dimensions WxLxH  : 65 x 150 x 65 cm

Net weight  : Approx. 75 kg

  • TH240S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH240-231
Stainless steel jacketed vessel with coil and stirrer
- Vessel content: 2.5 L
- heat transfer area: 600 cm2 (approx.) for Jacket
 : 350 cm2 (approx.) for Coil
- Stirrer: 0- 500 rpm
- Additionaltemperature sensors for vessel content and water outlet
  • TH240-050
Computer Interface (computer not included)
 This includes TH240S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH240-060   
Computer Control (computer not included)
 This includes TH 240-050 with the additional accessories for control function and additional
 software function for equipment controls by computer
  • TH240S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 231 JACKETED VESSEL WITH COIL & STIRRER

Posted on by

Thermodynamics > Heat exchangers

TH 231 JACKETED VESSEL WITH COIL & STIRRER

Enquiry

Video

Download

The apparatus is used for studying heat transfer with either an external jacket or an internal coil under batch wise or continuous feed conditions.

The unit consists of a jacketed vessel with a coil and stirrer and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel or counter flow or changing from jacked vessel to coil and stirrer may be done by rearranging flexible hoses.

A cold fluid in a vessel is heated by a hot fluid in the jacket or in the coil. An adjustable speed a stirrer and baffles are provided to allow thorough mixing of the vessel contents. The content volume in the vessel can be varied by an adjustable height overflow pipe. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer for jacketed vessel with or without stirrer both continuous and batch types.

     

  • Demonstration of heat transfer for heating coil with or without stirrer.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

     

  • Effect of vessel content.

  • Heat exchanger:
  
- Type: Jacketed vessel 
- Stainless steel vessel: Maximum content 2.5 L 
- Stainless steel jacket: Heat transfer area approximately 600 cm2 
- Stainless steel coil.: Heat transfer area approximately 350 cm2 
- Stirrer: 0- 500 rpm 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low. 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets, water outlets and vessel content. 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 115 x 65 cm

Net weight  : Approx. 50 kg

  • TH231S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH231-050
Computer Interface (computer not included)
 This includes TH231S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH231-060
Computer Control (computer not included)
 This includes TH 231-050 with the additional
 accessories for control function and additional
                             software function for equipment controls by computer
  • TH231S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 221 PLATE HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 221 PLATE HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a plate heat exchanger under parallel or counter flow conditions.

The unit consists of a plate heat exchanger and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel or counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Plate heat exchanger 
- Construction arrangement: Stainless steel 
- Total heat transfer area: 1200 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W. 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 32.5 kg

  • TH221S
 Learning Software
to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH221-050
 Computer Interface (computer not included)
This includes TH221S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH221-060
 Computer Control (computer not included)
This includes TH 221-050 with the additional
accessories for control function and additional
software function for equipment controls by computer
  • TH221S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 212 SHELL AND TUBE HEAT EXCHANGER, Transparent Casing

Posted on by

Thermodynamics > Heat exchangers

TH 212 SHELL AND TUBE HEAT EXCHANGER, Transparent Casing

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions.

The unit consists of a shell and tube heat exchanger, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel and counter flow is selected by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Shell and tube 
- Construction arrangement: Insulated stainless steel shell with stainless steel inner tubes 
 : Total heat transfer area 225 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W. 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 33.5 kg

  • TH212S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH212-001A
Copper inner tubes instead of stainless-steel inner tubes.
  • TH211-050
Computer Interface (computer not included)
 This includes TH212S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH211-060
Computer Control (computer not included)
 This includes TH 211-050 with the additional
 accessories for control function and additional software
 function for equipment controls by computer

 

  • TH212S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 211 SHELL AND TUBE HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 211 SHELL AND TUBE HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions.

The unit consists of a shell and tube heat exchanger and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel and counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
- Type : Shell and tube
- Construction arrangement : Insulated stainless steel shell with stainless steel inner tubes
: Total heat transfer area 600 cm2 (approx.)
  • Service module consisting of:
- Base frame with panel and footings for installation of heat exchanger, accessories and instruments
- Stainless steel hot water tank with level switch to prevent heater operation if level is too low
- Flexible hoses : 2
- Hot water pump : 1
- Heater : 3000 W.
- Flow meters : Hot water
- Sensors with digital display : Temperatures for hot and cold water inlets and outlets
  • Temperature control unit to limit temperature of hot water
  • Power supply  :  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 140 x 65 cm

Net weight  : Approx. 60 kg

  • TH211S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH211-001A
Copper inner tubes instead of stainless-steel tubes.
  • TH211-050
Computer Interface (computer not included)
 This includes TH211S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH211-060
Computer Control (computer not included)
 This includes TH 211-050 with the additional
 accessories for control function and additional software
 function for equipment controls by computer

  • TH211S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 203 CONCENTRIC TUBE HEAT EXCHANGER, Different Tube Metals.

Posted on by

Thermodynamics > Heat exchangers

TH 203 CONCENTRIC TUBE HEAT EXCHANGER, Different Tube Metals.

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a concentric tube under parallel or counter flow conditions and compare heat transfer coefficients for three different inner tube metals.

The unit consists of three concentric tube heat exchangers and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Selection of heat exchanger and parallel or counter flow is by control valves. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Comparison of heat transfer coefficients for stainless steel, copper and aluminum.

     

  • Effects of flow rate and temperature difference.

  • Construction arrangement
: 3 insulated concentric tubes with stainless steel outer tube and stainless steel, copper and
aluminum as inner tube metals		 
  • Service module consisting of:
  
- Hot water pump  
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures at hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water to not more than 80°C
  • Power supply  :  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 65 x 245 x 75 cm

Net weight  : Approx. 110 kg

  • TH203S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH010
Flow digital display
  • TH203-050
Computer Interface (computer not included)
 This includes TH203S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH203-060
Computer Control (computer not included)

 

This includes TH 203-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • TH203S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 202 CONCENTRIC TUBE HEAT EXCHANGER, Transparent Casing

Posted on by

Thermodynamics > Heat exchangers

TH 202 CONCENTRIC TUBE HEAT EXCHANGER, Transparent Casing

Enquiry

Video

Download

The apparatus is used for studying the heat transfer through a concentric tube under parallel or counter flow conditions.

The unit consists of a concentric tube heat exchanger, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control.  Parallel or counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Concentric tube 
- Construction arrangement: Insulated stainless steel outer with inner tubes 
 : Total heat transfer area 225 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses:  2 
- Hot water pump:  1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water tube mid-section 
 - Temperature control unit to limit temperature of hot water 
  • Power supply
: 220 V, 1 Ph, 50 Hz. Other power supply is available on request. 

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 33 kg

  • TH202S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • TH201-050

Computer Interface (computer not included)

 This includes TH202S and significant sensor(s) instead of analog measuring instrument(s), This includes TH201S and significant sensor(s) instead of analog measuring instrument(s),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH201-060

Computer Control (computer not included)

 

This includes TH 202-050 with the additional

accessories for control function and additional

software function for equipment controls by computer
  • TH202S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS