Category Archives: TH

TH 240 MULTI HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 240 MULTI HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying of three types of heat exchangers namely-concentric tube, shell and tube, and plate-under parallel or counter flow conditions.

The unit consists of the three heat exchangers and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Selection of the heat exchanger is simply by opening a valve and changing from parallel to counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Comparison of heat transfer for concentric tube, shell and tube, and plate heat exchanger.

     

  • Demonstration of heat transfer under parallel or counter flow.

     

  • Demonstration of batch type heat transfer for jacketed vessel (optional).

     

  • Determination heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Concentric tube: Insulated stainless steel outer with inner tubes 
 : Total heat transfer area 600 cm2 (approx.) 
- Shell and tube: Insulated stainless steel shell with 7 stainless steel inner tubes 
 : Total heat transfer area 600 cm2 (approx.) 
- Plate: Stainless steel, multiple plates 
 : Total heat transfer area 1200 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water mid-section of concentric tube 
  • Temperature control unit to limit temperature of hot water to not more than 80°C
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request

Net (unpacked) shipping dimensions WxLxH  : 65 x 150 x 65 cm

Net weight  : Approx. 75 kg

  • TH240S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH240-231
Stainless steel jacketed vessel with coil and stirrer
- Vessel content: 2.5 L
- heat transfer area: 600 cm2 (approx.) for Jacket
 : 350 cm2 (approx.) for Coil
- Stirrer: 0- 500 rpm
- Additionaltemperature sensors for vessel content and water outlet
  • TH240-050
Computer Interface (computer not included)
 This includes TH240S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH240-060   
Computer Control (computer not included)
 This includes TH 240-050 with the additional accessories for control function and additional
 software function for equipment controls by computer
  • TH240S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 231 JACKETED VESSEL WITH COIL & STIRRER

Posted on by

Thermodynamics > Heat exchangers

TH 231 JACKETED VESSEL WITH COIL & STIRRER

Enquiry

Video

Download

The apparatus is used for studying heat transfer with either an external jacket or an internal coil under batch wise or continuous feed conditions.

The unit consists of a jacketed vessel with a coil and stirrer and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel or counter flow or changing from jacked vessel to coil and stirrer may be done by rearranging flexible hoses.

A cold fluid in a vessel is heated by a hot fluid in the jacket or in the coil. An adjustable speed a stirrer and baffles are provided to allow thorough mixing of the vessel contents. The content volume in the vessel can be varied by an adjustable height overflow pipe. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer for jacketed vessel with or without stirrer both continuous and batch types.

     

  • Demonstration of heat transfer for heating coil with or without stirrer.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

     

  • Effect of vessel content.

  • Heat exchanger:
  
- Type: Jacketed vessel 
- Stainless steel vessel: Maximum content 2.5 L 
- Stainless steel jacket: Heat transfer area approximately 600 cm2 
- Stainless steel coil.: Heat transfer area approximately 350 cm2 
- Stirrer: 0- 500 rpm 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low. 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets, water outlets and vessel content. 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 115 x 65 cm

Net weight  : Approx. 50 kg

  • TH231S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH231-050
Computer Interface (computer not included)
 This includes TH231S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH231-060
Computer Control (computer not included)
 This includes TH 231-050 with the additional
 accessories for control function and additional
                             software function for equipment controls by computer
  • TH231S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 221 PLATE HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 221 PLATE HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a plate heat exchanger under parallel or counter flow conditions.

The unit consists of a plate heat exchanger and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel or counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Plate heat exchanger 
- Construction arrangement: Stainless steel 
- Total heat transfer area: 1200 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W. 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 32.5 kg

  • TH221S
 Learning Software
to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH221-050
 Computer Interface (computer not included)
This includes TH221S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH221-060
 Computer Control (computer not included)
This includes TH 221-050 with the additional
accessories for control function and additional
software function for equipment controls by computer
  • TH221S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 212 SHELL AND TUBE HEAT EXCHANGER, Transparent Casing

Posted on by

Thermodynamics > Heat exchangers

TH 212 SHELL AND TUBE HEAT EXCHANGER, Transparent Casing

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions.

The unit consists of a shell and tube heat exchanger, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel and counter flow is selected by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Shell and tube 
- Construction arrangement: Insulated stainless steel shell with stainless steel inner tubes 
 : Total heat transfer area 225 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses: 2 
- Hot water pump: 1 
- Heater: 3000 W. 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water
  • Power supply  : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 33.5 kg

  • TH212S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH212-001A
Copper inner tubes instead of stainless-steel inner tubes.
  • TH211-050
Computer Interface (computer not included)
 This includes TH212S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH211-060
Computer Control (computer not included)
 This includes TH 211-050 with the additional
 accessories for control function and additional software
 function for equipment controls by computer

 

  • TH212S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 211 SHELL AND TUBE HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 211 SHELL AND TUBE HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions.

The unit consists of a shell and tube heat exchanger and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Parallel and counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
- Type : Shell and tube
- Construction arrangement : Insulated stainless steel shell with stainless steel inner tubes
: Total heat transfer area 600 cm2 (approx.)
  • Service module consisting of:
- Base frame with panel and footings for installation of heat exchanger, accessories and instruments
- Stainless steel hot water tank with level switch to prevent heater operation if level is too low
- Flexible hoses : 2
- Hot water pump : 1
- Heater : 3000 W.
- Flow meters : Hot water
- Sensors with digital display : Temperatures for hot and cold water inlets and outlets
  • Temperature control unit to limit temperature of hot water
  • Power supply  :  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 50 x 140 x 65 cm

Net weight  : Approx. 60 kg

  • TH211S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH211-001A
Copper inner tubes instead of stainless-steel tubes.
  • TH211-050
Computer Interface (computer not included)
 This includes TH211S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH211-060
Computer Control (computer not included)
 This includes TH 211-050 with the additional
 accessories for control function and additional software
 function for equipment controls by computer

  • TH211S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 203 CONCENTRIC TUBE HEAT EXCHANGER, Different Tube Metals.

Posted on by

Thermodynamics > Heat exchangers

TH 203 CONCENTRIC TUBE HEAT EXCHANGER, Different Tube Metals.

Enquiry

Video

Download

The apparatus is used for studying heat transfer through a concentric tube under parallel or counter flow conditions and compare heat transfer coefficients for three different inner tube metals.

The unit consists of three concentric tube heat exchangers and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control. Selection of heat exchanger and parallel or counter flow is by control valves. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Comparison of heat transfer coefficients for stainless steel, copper and aluminum.

     

  • Effects of flow rate and temperature difference.

  • Construction arrangement
: 3 insulated concentric tubes with stainless steel outer tube and stainless steel, copper and
aluminum as inner tube metals		 
  • Service module consisting of:
  
- Hot water pump  
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures at hot and cold water inlets and outlets 
  • Temperature control unit to limit temperature of hot water to not more than 80°C
  • Power supply  :  220 V, 1 Ph, 50 Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  : 65 x 245 x 75 cm

Net weight  : Approx. 110 kg

  • TH203S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH010
Flow digital display
  • TH203-050
Computer Interface (computer not included)
 This includes TH203S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH203-060
Computer Control (computer not included)

 

This includes TH 203-050 with the additional accessories for control function and additional software function for equipment controls by computer
  • TH203S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 202 CONCENTRIC TUBE HEAT EXCHANGER, Transparent Casing

Posted on by

Thermodynamics > Heat exchangers

TH 202 CONCENTRIC TUBE HEAT EXCHANGER, Transparent Casing

Enquiry

Video

Download

The apparatus is used for studying the heat transfer through a concentric tube under parallel or counter flow conditions.

The unit consists of a concentric tube heat exchanger, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control.  Parallel or counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Concentric tube 
- Construction arrangement: Insulated stainless steel outer with inner tubes 
 : Total heat transfer area 225 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses:  2 
- Hot water pump:  1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water tube mid-section 
 - Temperature control unit to limit temperature of hot water 
  • Power supply
: 220 V, 1 Ph, 50 Hz. Other power supply is available on request. 

Net (unpacked) shipping dimensions WxLxH  : 50 x 84 x 65 cm

Net weight  : Approx. 33 kg

  • TH202S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • TH201-050

Computer Interface (computer not included)

 This includes TH202S and significant sensor(s) instead of analog measuring instrument(s), This includes TH201S and significant sensor(s) instead of analog measuring instrument(s),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH201-060

Computer Control (computer not included)

 

This includes TH 202-050 with the additional

accessories for control function and additional

software function for equipment controls by computer
  • TH202S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 201 CONCENTRIC TUBE HEAT EXCHANGER

Posted on by

Thermodynamics > Heat exchangers

TH 201 CONCENTRIC TUBE HEAT EXCHANGER

Enquiry

Video

Download

The apparatus is used for studying the heat transfer through a concentric tube under parallel or counter flow conditions.

The unit consists of a concentric tube heat exchanger, and a service module. The module comprises a hot water tank with a transfer pump and instruments for monitoring and control.  Parallel or counter flow is by switching cold water hoses with quick coupling. The unit requires outside water supply.

Instruction manual is also included.

  • Demonstration of heat transfer under parallel and counter flow.

     

  • Determination of heat transfer coefficient.

     

  • Effects of flow rate and temperature difference.

  • Heat exchanger:
  
- Type: Concentric tube 
- Construction arrangement: Insulated stainless steel outer with inner tubes 
 : Total heat transfer area 600 cm2 (approx.) 
  • Service module consisting of:
  
 - Base frame with panel and footings for installation of heat exchanger, accessories and instruments 
 - Stainless steel hot water tank with level switch to prevent heater operation if level is too low 
- Flexible hoses:  2 
- Hot water pump:  1 
- Heater: 3000 W 
- Flow meters: Hot water 
 : Cold water 
- Sensors with digital display: Temperatures for hot and cold water inlets and outlets 
 for hot and cold water tube mid-section 
 - Temperature control unit to limit temperature of hot water 
  • Power supply
: 220 V, 1 Ph, 50 Hz. Other power supply is available on request. 

Net (unpacked) shipping dimensions WxLxH  : 50 x 140 x 65 cm

Net weight  : Approx. 65 kg

  • TH201S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • TH201-050

Computer Interface (computer not included)

 This includes TH201S and significant sensor(s) instead of analog measuring instrument(s), This includes TH201S and significant sensor(s) instead of analog measuring instrument(s),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH201-060

Computer Control (computer not included)

 This includes TH 201-050 with the additional accessories for control function and additional software function for equipment controls by computer

  • TH201S
Learning Software
 

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

TH 150 MINI GAS TURBINE POWER PLANT

Posted on by

Thermodynamics > Gas turbines

TH 150 MINI GAS TURBINE POWER PLANT

Enquiry

Video

Download

The unit is an educational two-shaft gas turbine power plant with a radial flow compressor and axial flow turbines, gear box, generator, and electrical loads as in the modern gas turbine power plant.

The first stage is a hot gas generator. Inlet air through an orifice flow measuring device is compressed by a single stage radial flow compressor. The turbine is motor started and runs on Jet A fuel. Fuel is injected by a fuel pump and ignited in the combustion chamber providing hot gas for a single stage axial flow turbine which in turn drives the compressor. The hot gas is discharged axially to a larger power turbine on the second shaft and exhausts to atmosphere. A fan is provided for cooling the gear box.

The power turbine output shaft is connected to the gear box. An alternator is connected to the gear box by a direct coupling. the electrical output is converted by an inverter to 220 VAC and the electrical power output is connected to a lamp load.

An Electronic Control Unit (ECU) controls the basic turbine operation. Additional instruments are provided for monitoring and controlling the plant operation and performance.

A touch screen computer with an interface unit and software are provided for speed and electrical load control, data display and analysis, and to assist the ECU.

Safety features include safety guard, gas generator over speed shutdown, power turbine over speed protection, power turbine entry over temperature shut down and emergency switch. The unit is floor standing with removable supports.

Instruction manual is also included.

  • Understanding the thermodynamic process.

  • Input power, output power and plant efficiency.

  • Mechanical power of gas turbine (optional)

  • Gas generator  engine construction.
  
- Diffuser: High strength aluminium 
- Combustion chamber: Stainless steel 
- Bearings: Ceramic ball bearing 
- Turbine wheel: Vacuum cast inconel 
- Compressor: High grade aluminium alloy 
  • Gas generator
  
- Running fuel: Jet A or kerosene with jet oil 
  • Power turbine construction.
  
- Turbine wheel: Vacuum cast inconel 
- Interstage guide vane: Stainless steel 
  • Gear box.
  
- Type: Planetary 
- Lubrication: Jet A 
  • Alternator
: Approx. 1.5 kW power 
  • Inverter
  
- Voltage conversion: 12 VDC to 220 VAC 
  • Lamp load
: 600W with individual lamp switch. 
  • Gear box and generator connection
: Direct coupling 
  • Output power
: Electrical approx. 400 W 
 : Mechanical approx. 700 W (required TH150-001) 
  • Accessories
: Engine cooling fan 
 : Gear box cooling fan 
 : Engine exhaust duct 
 : 2 ear muffs 
 : Jet oil 
 : arometer 
  • Sensors
  
- Temperatures: Ambient air, diffuser exit, gas generator turbine entry, power turbine entry and exit. 
- Pressures: Diffuser exit, power turbine entry and exit. 
- Speeds: Gas generator and gear box output shaft. 
- Voltage and current.  
- Fuel flow rate.  
- Air flow rate: Differential pressure at inlet orifice. 
  • Computer Interface unit with software for data display, analysis and control by computer.
  • WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)

  • Power supply  :  220V 1Ph 50Hz. Other power supply is available on request.

Net (unpacked) shipping dimensions WxLxH  :  100x 125x 110 cm

Net weight  :  Approx. 165 kg

  • TH150-001
Dynamometer for measurement of approximate mechanical power
 - Modification of alternator to dynamometer for torque measurement
 - Torque sensor with signal converter
 - Additional software for torque and power readings.
  • TH150-002
Silencer unit with stand
  • TH150-014
Dynamometer water cooling unit with pump instead of outside water supply.
 - Capacity: 2 RT
SIMILAR PRODUCTS

TH 137 COMPACT STEAM TURBINE POWER PLANT, 1.5 kW

Posted on by

Thermodynamics > Compact steam power plants

TH 137 COMPACT STEAM TURBINE POWER PLANT, 1.5 kW

Enquiry

Video

Download

The unit is designed to simulate modern steam power plant. Main components consist of a feed water system, a small industrial boiler, a steam turbine, a generator and lamp load, a condenser with a condensate tank and a pump, and a cooling tower. Accessories such as fuel tank, fuel flow meter, feed water meter, and a stack are also included. Instruments are provided for measurement of pressures, temperatures, output voltage and currents.

The boiler uses diesel fuel to generate saturated steam at a set pressure to run the steam turbine. Exhaust from the turbine is saturated vapor at the atmospheric pressure. The vapor is condensed in a condenser and condensate is returned to the feed tank for reuse. A cooling tower circulates cooling water to the condenser. Public water is treated and stored in the feed tank. A pump draws water from the feed tank to the boiler.

The saturated steam from the boiler may be superheated by a super heater (optional). In this case the turbine is also modified for superheated steam run.

An alternator is connected to the turbine through a synchronous belt-gear system. The inverter converts alternator DC output to AC for lamp load.

Safety features include those for boiler, turbine over speed, guard and safety switch.

A touch screen computer with an interface unit and software are provided for data display and analysis.

Instruments are provided for measurement of relevant data. Instruction manual is also included.

  • Measurement of feed water and fuel flow rates.

     

  • Boiler efficiency, turbine generator efficiency, and overall power plant efficiency.

     

  • Effect of superheated steam on turbine efficiency (optional)

     

  • Condenser heat transfer efficiency.

     

  • Cooling tower efficiency.

     

  • Rankine cycle efficiency.

The plant set consists of:  
Boiler Unit  
- Type: Vertical, water tube 
- Rated heat output: 188 kW (162,000 kcal/h) 
- Equivalent evaporation: Approx. 300 kg/h steam 
- Maximum working pressure: 10 kg/cm2 (0.98 MPa) 
- Measuring instruments: Pressure gauge for steam outlet 
 : Temperature sensors (3) for feed water, boiler outlet and exhaust stack 
- Safety devices: Safety valve 
 : Level gauge and switch at boiler 
 : Low level alarm 
- Boiler accessories: Steam separator 
 : Steam pressure regulator 
 : Feed water pump 
 : Stack, 2 x 2.4 m with 2 elbows 
  • Burner:
  
- Type: Forced draft, pressure atomized 
- Control: On-Off 
- Fuel: Diesel or kerosene 
  • Fuel system
: Fuel tank, fuel strainer and fuel meter 
  • Feed water system
: Resin filter for public water. 
 : Soft water tank 
 : Water meter 
 : Stopwatch 
  • De-ionized chemical
: Automatic feed system 
  • Power supply
:380 V, 3 Ph, 50Hz. Other power supply is available on request. 
Steam Turbine  
  • Technical data:
  
- Type: Single stage, twin nozzle impulse turbine 
- Construction: Vacuum cast inconel wheel 
 : Stainless steel casing, shaft and nozzle 
 : Ceramics and steel bearing 
- Maximum mechanical output: Approx. 1.5 kW (required TH137-016) 
- Maximum electrical output: Approx. 0.9 kW 
- Maximum speed: Approx. 33,000 rpm 
- Exhaust pressure: Atmospheric 
  • Measuring instruments
  
- Pressure: Pressure gauge for steam inlet 
 : Water manometer for turbine outlet 
- Sensor with digital display: Speed for turbine 
 : Temperature for steam inlet and outlet 

Generator and Lamp Load

  
   
  • Technical data:
  
- Alternator: 1.5 kW power 
- Inverter: 220V, 1 ph, 50Hz 
- Lamp load: 1400W, with individual switch 
  • Measuring instruments:
  
- Sensor with digital display: Inverter voltage and current 
   

Condenser (TH 102-013)

  
  • Description:

The unit allows a study of heat transfer in a heat exchanger as well as recover condensate for reuse. The unit consists of a counter flow steam tube heat exchanger and instruments for measurement of temperatures, cooling water flow rate.

 
  • Technical data:
  
- Type: Steam tube 
- Accessories: Cooling water pump 
 : Condensate transfer pump 
 : Condensate tank 
 : Strainer 
  • Measuring instruments:
  
- Flow rate: Water meter 
- Sensor with digital display: Temperature for condensate, 
 cooling water inlet and outlet 

Cooling Tower (TH 137-014)

  
  • Description:
  
 

This is an educational unit for recovering of condenser cooling water as well as studying of cooling tower efficiency. A cooling tower is recommended to recycle cooling water in the case TH102-013 condenser is used. The unit consists of a cooling tower unit, a storage tank, a circulating pump and temperature gauges.

 
  • Technical data:
  
- Cooling tower capacity: Up to 30 RT 
- Circulating pump  
  • Measuring instruments:
  
- Sensor with digital display: Temperature for wet bulb 

 Shipping dimensions and weight: One 20 ft. containers

  • TH137S
Learning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • TH100-021
Digital flue gas analyzer (testo300 or equal) for O2 and CO contents
  • TH100-022
Portable pH and TDS meter
  • TH100-023
Hardness water tester
  • TH101-021
Sand filter for water with suspended materials
  • TH101-022
Carbon filter for water with odour or rust
  • TH135-005EBA
Electric boiler instead of diesel boiler.
 Capacity:
 - Equivalent evaporation          : Approx. 300 kg/h steam
 - Maximum working pressure         :  10 kg/cm2 (0.98 MPa)
 
  • Other type of fuel is available (i.e. LPG) on request.
  • TH136-016
Turbine mechanical power measurement using hydraulic dynamometer with torque sensor.
  • TH137-020
Electric Super Heater
Description

The unit provides superheated steam for other use such as for a stream turbine. Saturated steam from the boiler is further heated in the electric super heater. Instruments are provided for Measurement of temperature and pressure. The test is to be carried out at low steam rate and compare thermal efficiency for saturated and superheated steam.

 Typical experiment
 - Effect of superheated steam on prime mover efficiency
 Technical data
 - Capacity     : 12 kW
 - Measuring instruments     : Temperature sensor (1) for superheater steam outlet
 - Temperature control unit to limit temperature of superheat steam to not more than 250°C
 - Power supply         : 380 V, 3 Ph, 50Hz.
  • TH137-050
Computer Interface (computer not included)
 This includes TH137S and significant sensor(s) instead of analog measuring instrument(s), data acquisition (capture, display, graph and/or data export),
 additional software function for real-time data logging with computer interface unit and WiFi feature for data logging and real-time display remotely on smartphone (iOS and Android)
  • TH137-060
Computer Control (computer not included)
 This includes TH 137-050 with the additional accessories for control function and additional software function for equipment controls by computer
 
TH136SLearning Software
 to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS