Monthly Archives: February 2024

MP 121 AXIAL FLOW FAN DEMONSTRATION UNIT, Computer Interface

Posted on by

Airflow and air compression > Fan, blower & compressor demonstration units

MP 121 AXIAL FLOW FAN DEMONSTRATION UNIT, Computer Interface

Enquiry

Video

Download

This is a bench top unit for a study of axial flow fan characteristics with data analysis by computer (separately supplied).
The unit consists of a small axial flow fan with DC motor on a steel base, a speed control switch, inlet and outlet ducts, an interface box, sensors, and software. The box includes power supply for the fan, display and computer interface unit. It also provides interface ports to sensors and computer.
The unit is to be use with a computer (separately supplied).
Instruction manual is also included.

  • Flow rate VS pressure
  • Fan input, output and overall efficiency
  • Effect of speed on fan performance
  • Fan ratings
  
- Maximum flow rate: 2.5 m3/min 
- Maximum pressure: 0.10 kPa 
  • Inlet duct
: Transparent with flow straighteners and inlet orifice 
  • Outlet duct
: Transparent with flow straighteners and damper 
  • Sensors with digital display
: Differential pressure across the fan 
 : Differential pressure at the orifice 
 : Temperature of inlet air 
 : Motor input power 
 : Fan speed 
 : Atmospheric pressure 
  • Computer interface unit
  
  • Software for data display and analysis by computer (separately supplied)
  • WiFi feature for data logging and/or real-time display remotely on smartphone (iOS and Android).
  • Power supply : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net shipping dimensions WxLxH
 : 57 x 122 x 33 cm
  • Net weight
 : Approx. 30 kg
  • MP121-060
Computer Control (computer not included)
 This includes the additional accessories for control function and additional software function for equipment
 controls by computer
SIMILAR PRODUCTS

MP 111 MULTI STAGE CENTRIFUGAL AIR COMPRESSOR DEMONSTRATION UNIT, Computer Interface

Posted on by

Airflow and air compression > Fan, blower & compressor demonstration units

MP 111 MULTI STAGE CENTRIFUGAL AIR COMPRESSOR DEMONSTRATION UNIT, Computer Interface

Enquiry

Video

Download

This is a bench top unit for studying the multi stage centrifugal air compressor characteristics with data analysis by computer (separately supplied).
The unit consists of a small multi stage air compressor with a motor on a steel base, inlet and outlet ducts, sensors and software.
Speed control is by a variac.
Instruction manual is also included.

  • Flow rate vs pressure
  • Compressor input, output, and overall efficiency
  • Effect of speed on compressor performance
  • Compressor
  
- Type: 2 stage, centrifugal 
- Rated maximum flow rate: 0.03 m3/s 
- Rated maximum pressure: 25 kPa 
  • Inlet duct
: Transparent with orifice 
  • Outlet duct
: Transparent with damper 
  • Speed control
: Variac 
  • Sensors with digital display
: Differential pressure across the fan 
 : Differential pressure at the orifice 
 : Temperature of inlet air 
 : Compressor speed 
 : Input power 
 : Atmospheric pressure 
  • Computer interface unit
  
  • Software for data display and analysis by computer (separately supplied)
  • WiFi feature for data logging and/or real-time display remotely on smartphone (iOS and Android).
  • Power supply : 220 V, 1 Ph, 50 Hz. Other power supply is available on request.
  • Net shipping dimensions WxLxH      
:  55 x 82 x 35 cm 
  • Net weight
:  Approx. 23 kg 
   

 

 
  
  
  

 

SIMILAR PRODUCTS

MP 110 CENTRIFUGAL FAN DEMONSTRATION UNIT, Computer Interface

Posted on by

Airflow and air compression > Fan, blower & compressor demonstration units

MP 110 CENTRIFUGAL FAN DEMONSTRATION UNIT, Computer Interface

Enquiry

Video

Download

This is a bench top unit for studying the small centrifugal fan characteristics with data analysis by computer (separately supplied).
The unit consists of a small industrial centrifugal fan with a backward blade impeller and a motor on a steel base, inlet and outlet ducts, instrument box, sensors, and software. An interchangeable forward blade impeller is provided for comparison of operating characteristics.
Instruction manual is also included.

  • Flow rate vs pressure
  • Fan input, output and overall efficiency
  • Effect of speed on fan performance
  • Comparison of backward and forward blade impellers
  • Fan ratings :
  
- Maximum flow rate: 10 m3/min 
- Maximum pressure: 0.5 kPa 
  • Inlet duct
: Transparent with flow straightener and inlet orifice 
  • Outlet duct
: Transparent with flow straightener and damper 
  • Sensors with digital display
: Differential pressure across the fan 
 : Differential pressure at the orifice 
 : Temperature of inlet air 
 : Motor input power 
 : Fan speed 
  • Accessories
: Forward blade impeller and barometer 
  • Computer interface unit
  
  • Power supply
: 230V 1Ph 50Hz. Other power supply is available on request. 
  • Net shipping dimensions WxLxH      
:  64 x 101 x 55 cm 
  • Net weight
:  Approx. 40 kg f 
   
  • MP110-060
 MP110-060
This includes the additional accessories and additional software function for equipment controls by computer
SIMILAR PRODUCTS

Product Template

Posted on by

Airflow and air compression > Compact fan & blower test sets

MP 100 AIR FLOW BENCH

Enquiry

Video

Download

The tester is designed to calibrate pressure gauge.
It consists of a precision machined stainless steel piston and cylinder with calibrated weights. The weights are applied on the upper end of the piston rod to generate pressure. The assembly is mounted on adjusting screws with a bull’s eye level. The pressure gauge is connected to the cylinder, thus subject to known pressure and comparison with the gauge reading can be made. Leaking liquid from the cylinder is returned to a reservoir. The cylinder can be simply refilled with liquid from the reservoir without removing the piston.
Instruction manual is also included.

  • Calibration of a pressure gauge
  • Determination of gauge errors as a function of true pressure
Pressure gauge : 1
Weights : 1 lot
  • Net (unassembled) Shipping Dimensions WxLxH:  14 x 38 x 25 cm
  • Net Weight:  Approx. 10 kg

HB011S

: Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.

HP 011

:  Pressure digital display

HB 011-002

:  Additional calibration pressure gauge Class 1 with connection.

HB 011-003A

:  Weights in “N” instead of standard weight
Other optional equipment, please contact manufacturer

HB011S : Learning Software to support both online/offline training with data   calculation and analysis by manual data entry from analog measuring instruments.
SIMILAR PRODUCTS

 MM 312 TORSIONAL OSCILLATIONS APPARATUS

Posted on by

Fluid Mechanic > HB 

MM 312 TORSIONAL OSCILLATIONS APPARATUS

Enquiry

Video

Download

This mechanism demonstrates torsional oscillations of single or multi-rotor and /or geared systems with low natural frequencies.

  • Net (unassembled) Shipping Dimensions WxLxH: 35 x 82 x 30 cm
  • Net Weight:  Approx. 32 kg
  • MM312HS

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

HB015S  

Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

MM 223 TRIPLE EPICYCLIC GEAR TRAIN

Posted on by

Fluid Mechanic > HB 

MM 223 TRIPLE EPICYCLIC GEAR TRAIN

Enquiry

Video

Download

This mechanism demonstrates relative angular motion in degrees between four shafts with common axis using three epicyclic trains to produce two forward speeds and a reverse.

  • Net (unassembled) Shipping Dimensions WxLxH: 26 x 42 x 25 cm
  • Net Weight:  Approx. 15 kg
  • HB015S
 Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
  • HF011-035
 Variable area flow meter, up to 35 LPM for flow rate indication
HB015S  

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HB 210 PRESSURE MEASUREMENT APPARATUS

Posted on by

Fluid Mechanic > HYDROSTATIC TEST ACCESSORIES AND EQUIPMENT

HB 210 PRESSURE MEASUREMENT APPARATUS

Enquiry

Video

Download

The apparatus is intended to introduce students to basic pressure measuring devices as well as pressure gauge calibration.

The apparatus consists of a U-tube and an adjustable inclined water manometers, pressure and vacuum gauges, and a syringe for generation of pressure and vacuum. A dead weight pressure tester is also included.

Instruction manual is also included.

  • Familiarization with different pressure measuring devices

  • Comparison of water manometers with pressure and vacuum gauges

  • Comparison of U-tube and inclined water manometers

  • Calibration of pressure gauge

  • Pressure gauges, 4 in.
 :  vacuum
:  pressure
  • Inclined water manometer
 :   1
  • U-tube water manometer
 :   1
  • Syringe
  • HB 011 Dead Weight Pressure Tester
     - Pressure gauge
     - Calibration weights :   1 lot
  • Net (unassembled) Shipping Dimensions WxLxH: 36 x 70 x 75 cm & HB 011
  • Net Weight:  Approx. 25 kg
  • HB210S

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • HB210-001A

Vacuum / pressure air pump instead of syringe

   - Capacity : 0.25 kW

   - Vacuum : -0.5 to 0 kg/cm2

   - Pressure : 0 to 0.5 kg/cm2

   - Power supply : 220V, 1 Ph, 50 Hz. Other power supply is available on request.

  • MW102M-450

U-tube mercury manometer for comparison with pressure gauges

   - Range :  0-450 mm x 1 mm graduation)

    Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally.

              Approximately 25 mL or 350g is required. Filling kit is provided.

  • HP011A
Pressure digital display instead of pressure gauge
  • HF033C
Portable differential pressure meter, 0-2100 mbar, 0.2% accuracy
  • HF034A
Portable differential pressure meter, 0-140 mbar, 0.2% accuracy instead of water manometer
  • HB200S

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS

HB 205 FLUID STATICS AND MANOMETRY

Posted on by

Fluid Mechanic > HYDROSTATIC TEST ACCESSORIES AND EQUIPMENT

HB 205 FLUID STATICS AND MANOMETRY

Enquiry

Video

Download

This is a bench top apparatus for studying and measurement of liquid under hydrostatic conditions using manometers.

The apparatus consists of a transparent tank connected to various types of manometers and other measuring devices for measurement of level, pressure and differential pressure.

Instruction manual is also included.

  • Head of liquid in manometer

  • Measurement of liquid level using scale with parallax principles

  • Liquid surface in tubes of different diameters

  • Measurement of change in liquid level using Vernier hook and point gauge

  • Measurement small change of liquid level using micromanometer

  • Measurement of differential pressure by single manometer

  • Measurement of small differential pressure using inclined manometer

  • Measurement of liquid differential pressure using inverted U-tube

  • Measurement of gas differential pressure using U-tube

  • Sensitivity of U-tube manometer due to liquid density

  • Pressure drop of fluid flow in pipe

  • Effect on trapped air on manometer accuracy

  • Main reservoir tube
:               100 mm inside diameter            
  • Manometer measuring range
:               0-450 mm   
  • Manometer tubes
:               8 mm inside diameter                

            - 1 U-tube

            - 1 inverted U-tube

            - 2 vertical tubes                                          

            - 1 vertical tube with different cross section                             

            - 1 tube inclined manometer

    
  • Accessories
    

             - 1 tube lid 

            - 1 gas bubble micro-manometer 

            - 1 syringe  

    
            - 1 hook and point gauge:               0-150 mm × 0.05 mm graduation   

 

  • Net (unassembled) Shipping Dimensions WxLxH: 70 x 67 x 90 cm
  • Net Weight:  Approx. 17 kg
  
SIMILAR PRODUCTS

HB 201 HYDROSTATICS PANEL

Posted on by

Fluid Mechanic > HYDROSTATIC TEST ACCESSORIES AND EQUIPMENT

HB 201 HYDROSTATICS PANEL

Enquiry

Video

Download

The equipment is a bench top unit for the study of basic properties of fluids in hydrostatic conditions. Components are placed on the panel. The unit can be placed on a suitable bench top and requires outside water supply.             

Instruction manual is also included.

  • Measurement of level, pressure, temperature, specific gravity, viscosity, humidity

  • Demonstration of Pascal’s law, Archimedes principles, capillary effect

  • Determination of metacentric height (optional), center of pressure (optional)

  • Calibration of pressure gauge (optional)

The accessories for the panel include:
  •  Inclined water manometer
  • Barometer
  • Hygrometer
  • Thermometer
  • Hydrometer
  • Stainless steel vernier hook gauge
  • Capillary viscometer
  • Falling sphere viscometer
  • Specific gravity bottle
  • Beaker
  • Graduated cylinder
  • Hand pipette
  • SP111 Archimedes apparatus
  • SP112 Pascal’s apparatus
  • SP121 Capillary tubes
  • SP122 Capillary attraction plates
  • SP126 Triple beam balance
  • Plastic box
  • Net (unassembled) Shipping Dimensions WxLxH: 54 x 91 x 80 cm
  • Net Weight:  Approx. 31 kg
  • HB201S

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

   
  • HB201-001
Steel cabinet for panel support and accessories storage   
  • MW102M-450          

U-tube mercury manometer

   - Range :  0-450 mm x 1 mm graduation

   - Accessory :  Hand air pump

Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally.

          Approximately 25 mL or 350g is required. Filling kit is provided.

   
  • HP002B-1
Bourdon gauge   
  • HF033C
Portable differential pressure meter, 0-2100 mbar, 0.2% accuracy   
  • HB011
Dead weight pressure tester   
  • HB012
Hydrostatic pressure   
  • HB014
Metacentric height   
  • SP113
Boyle’s law apparatus   
  • SP114
Surface tension apparatus   
  • HB201S
 Learning Software to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.
 
SIMILAR PRODUCTS

HB 200 HYDROSTATICS BENCH

Posted on by

Fluid Mechanic > HYDROSTATIC TEST ACCESSORIES AND EQUIPMENT

HB 200 HYDROSTATICS BENCH

Enquiry

Video

Download

The equipment is a self-contained unit for the study of basic properties of fluids in hydrostatic conditions.  Water is provided in a storage tank of the bench with a pump to deliver water for the experiments. Accessories for individual experiments are placed on the bench panel and can also be stored in the bench cabinet. The unit is on steel frame on wheels.

Instruction manual is also included.

  • Measurement of level, pressure, temperature, specific gravity, viscosity, humidity.

  • Demonstration of Pascal’s law, Archimedes principles, capillary effect

  • Determination of metacentric height and hydrostatic pressure

  • Calibration of pressure gauge

The accessories for a bench include:    
  • Inclined water manometer
  • Barometer
  • Hygrometer
    
  • Thermometer
:               1   
  • Hydrometer
:               1   
  • Stainless steel Vernier hook and point gauge
:               1   
  • Capillary viscometer
:               1   
  • Falling sphere viscometer
:               1   
  • Specific gravity bottle
:               1   
  • Beaker
:               1   
  • Graduated cylinder
:               1   
  • Hand pipette
:               1   

  • HB011 Dead weight pressure tester 

    

     - Pressure gauge

     - Weights         

    

  • HB012 Hydrostatic pressure                                   

         - Weights
    

  • HB014 Metacentric height                              

  • SP111 Archimedes apparatus                    

  • SP112 Pascal’s apparatus

  • SP121 Capillary tubes

    
  • SP122 Capillary attraction plates
:               1 pair   
  • SP126 Triple beam balance
    
  • Water storage tank with pump
:               1 set   
  • Bowl
    
  • Power supply     
:               220 V, 1Ph, 50 Hz. Other power supply is available on request.    
     

 

  • Net (unassembled) Shipping Dimensions WxLxH: 73 x 91 x 169 cm
  • Net Weight:  Approx. 980 kg
  • HB200S

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

  • SP113
Boyle’s law apparatus
  • SP114
Surface tension apparatus
  • MW102M-450

U-tube mercury manometer

- Range :  0-450 mm x 1 mm graduation

- Accessory :  Hand air pump

Note: Due to transport laws, mercury cannot be supplied. Buyer must source it locally.

          Approximately 25 mL or 350g is required. Filling kit is provided.

  • HP002B-1
Bourdon gauge
  • HF033C
Portable differential pressure meter, 0-2100 mbar, 0.2% accuracy
  • HB200S

Learning Software

to support both online/offline training with data calculation and analysis by manual data entry from analog measuring instruments.

SIMILAR PRODUCTS